Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have an Asterisk based PBX that I'm providing VoIP services with, My gateway is a Cisco ASA 5505 running 8.2 and I only have one public IP Available along with other services I provide with that IP. I also do not have a smartnet account available to do a IOS update.

I do have calls working currently by simply forwarding all traffic to that host for about a minute and then removing the static NAT route, After I remove the route Voice traffic still gets forwarded to the inside host like it should, how ever if i ever add a remote phone that needs to connect externally it will not work.

What I need to do is forward the UDP port range of 10000-20000, however it seems I can't create a port map for UDP, or define a range of ports for UDP in a static Route.

SIP (5060) is properly forwarded but that only handles the session not voice, any help would be greatly appreciated.

share|improve this question
    
The ASA doesn't seem to be capable of this. I'd love to find out I'm wrong, though... –  Michael Hampton Feb 13 '13 at 20:38
    
8.4 seems to be capable of it, I managed to upgrade the IOS but every time Nat the ports it states the ports can not be reserved. –  charles.schlue Feb 14 '13 at 17:45
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.