Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

So here's my situation. I have three 1TB disks that I want to set up as RAID 5. One of these three disks has all my data on it and the other two are uninitialized.

I have a hot swap disk that has backups of the 1TB disk with the data on it, and I'm trying to figure out the following: Once I have the three 1TB disks set up as RAID 5, will a full system restore from my backup disk safely bring my system back into working order? What about a bare-metal restore? What's the best way to restore my data onto my fresh RAID 5 setup?

EDIT: I'm using software RAID, not hardware.

Thanks for your help.

share|improve this question
1  
Is not using software RAID an option? Because that's what I'd pick. –  HopelessN00b Mar 7 '13 at 15:36
add comment

2 Answers

up vote 1 down vote accepted
  1. Save an image (or backup all data) of your system using whatever baremetal backup/restore application you prefer.

  2. Create RAID5 array on the 3 disks, which will destroy all data on them.

  3. Restore image (or reinstall OS and restore data) to new array.

  4. Purchase hot spare for array.

This is a bare metal procedure.

If this is a server, please do not use software RAID.

share|improve this answer
    
Will this still work if the RAID is software, not hardware? –  bstamour Mar 7 '13 at 15:33
    
Windows Server 2008, as far as I can remember, cannot boot from a software RAID5 volume. –  tombull89 Mar 7 '13 at 15:40
    
@tombull89, i believe you are correct, how can it boot from a RAID5 that doesn't exist, and cannot be created without destroying all data on the array to create, kind of a cart before the horse thing. You can only setup a software RAID 5 as a data partition. –  DanBig Mar 7 '13 at 15:47
    
I decided to just go with a hardware RAID setup. –  bstamour Mar 7 '13 at 16:40
add comment

You cannot boot from a software RAID5 volume in Server 2008. What I have on my Server 2008 Fileserver is three disks in RAID5 and then a 320GB boot disk. The RAID5 can be transferred between servers (indeed, I did successfuly when moving from a bargain rackmount case to a Microserver chassis).

You, also, cannot add disks to a RAID volume in Server 2008. You need to backup the data you have, create the RAID5 volume, and then restore to the newly-created RAID5 volume.

What I would do is buy another disk and use that as a boot volume, then use the other disks as your data store. Or look at buying a hardware RAID card that supports RAID5.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.