I just built a new web server with a mother board that has two Nic Cards: These Nic Cards are teamed under one Nic: 192.168.4.4
Note: the team is designed to provide: - fault tolerance - shared bandwidth
I setup a DMZ zone (X2) with an IP address: 192.168.2.4
The 1st physical cable from the server: Team Nic 1 of 2 is plugged into X2 and every thing works fine.
Now I need to plug in the other physical cable, Team nic 2 of 2 into DMZ zone (x3). Note sure how I'm suppose to configure it?
I assume I need to assign it another IP address, which obviously can't be the same as 192.168.2.4, but if I assign it, for example: 192.168.3.4 and 192.168.2.4 fails then, my web server will have an invalid gateway address, plus I'll have to setup up redundant access rules and objects :(