Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I was wondering if RAID 1 disks are usable straight away, without the RAID controller. Possible?

share|improve this question
add comment

2 Answers

up vote 3 down vote accepted

Depends on the RAID controller.

It if stores metadata on the discs, then obviously no. The RAID volume you see may be in a partition the controller interprets.

That should be the norm today.

share|improve this answer
    
I was wondering if I could use an existing disk simply inserting it as the first disk in the RAID 1 array. Once in use, I would add the other disks –  Riccardo Mar 18 '13 at 7:58
    
THe answer most likely is no. –  TomTom Mar 18 '13 at 8:52
    
Tom, thanks. :-) –  Riccardo Mar 18 '13 at 9:33
add comment

As far as I know and have experienced, you can't just take a disk which was once part of a RAID configuration and plug it in to any computer hoping that it can be used as any other disk.

share|improve this answer
    
And you tried that out with how many hundred different brands of raid controllers? Just to put SOME quantifiable information into your post. –  TomTom Mar 18 '13 at 6:14
    
Can't brag with quantities, but for the ones I've tried (MegaRAID/PERC, HighPoint, Linux Software Raid and a few others I can't name) this did not succeed. –  sbrattla Mar 18 '13 at 6:23
    
Please notice that I'm pointing to RAID 1 (mirrors) –  Riccardo Mar 18 '13 at 7:54
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.