I have been trying to get port forwarding working with a newly installed cisco router. I cannot seem to find where my fault is and have been looking for quite a while.
The relevant section of my config:
interface FastEthernet0/0 ip address dhcp ip nat outside speed 100 full-duplex no cdp enable ! interface FastEthernet0/1 ip address 10.10.250.1 255.255.255.0 ip nat inside speed 100 full-duplex ! router eigrp 250 passive-interface FastEthernet0/0 network 10.10.250.0 0.0.0.255 no auto-summary ! ip nat inside source list NAT interface FastEthernet0/0 overload ip nat inside source static udp 10.10.250.201 9987 interface FastEthernet0/0 9987 ip nat inside source static tcp 10.10.250.201 30033 interface FastEthernet0/0 30033 ip nat inside source static tcp 10.10.250.201 10011 interface FastEthernet0/0 10011 ip nat inside source static tcp 10.10.250.201 22 interface FastEthernet0/0 443 ip nat inside source static tcp 10.10.250.201 80 interface FastEthernet0/0 80 no ip http server no ip http secure-server ip classless ip route 0.0.0.0 0.0.0.0 FastEthernet0/0 dhcp ! ! ! ip access-list extended NAT permit ip any any
There has to be an issue with my config somewhere? Or am I missing something necessary to get port forwarding working?
Here is the current NAT table stripped down to show only my rules:
cisco2621#show ip nat tran Pro Inside global Inside local Outside local Outside global udp x.x.x.x:9987 10.10.250.201:9987 --- --- tcp x.x.x.x:10011 10.10.250.201:10011 --- --- tcp x.x.x.x:80 10.10.250.201:80 --- --- tcp x.x.x.x:443 10.10.250.201:22 --- --- tcp x.x.x.x:30033 10.10.250.201:30033 --- ---