We have a new server here with an Intel Server Board S1200BTL and I'm trying to set up a RAID 1 for data storage. I have Debian 6 installed on an SSD, and two 2TB hard drives that are supposed to be in a RAID 1 array.
The onboard SATA controller uses Intel® Embedded Server RAID Technology II, and I configured the two 2TB drives to be in a RAID 1 array. On startup, the messages from the RAID controller indicate that the array is online.
Now, when I look at it under Linux I still see two separate drives
sdc, while I expected to only see the virtual drive created by the RAID here.
Am I misunderstanding this and I still need some driver support for the RAID here? Or is there anything else besides creating the array I have to do?