Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a DELL 2950 with a PERC5/i controller and a SAS backplane and my intention is to switch to SATA on the cheap. I don't even have drive trays.

This backplane has SAS ports. I just bought 2 trays. Unfortunately those trays do not include interposer boards (SAS/SATA adapter) and I can't afford to buy these.

I see there is an additional SAS port on the PERC and I've read that there is an 1SAS-to-4SATA cable (http://www.otto.de/DELOCK-KabelAdapter-SAS-32pin-zu-4x-SATA-Metall-SFF-8484-4x-SATA/shop-de_dpip_A91355P-0/#Ueberblick).

Can I use that instead of the interposer method? I probably just have to connect it from the PERC to the hard drives...

Where can I get the power cables for the drives?

share|improve this question

closed as off topic by ThatGraemeGuy, TomTom, MadHatter, Jenny D, Ward Jun 4 '13 at 13:25

Questions on Server Fault are expected to relate to professional server, networking, or related infrastructure administration within the scope defined by the community. Consider editing the question or leaving comments for improvement if you believe the question can be reworded to fit within the scope. Read more about reopening questions here.If this question can be reworded to fit the rules in the help center, please edit the question.

    
I edited your question to make it a bit more readable and conform to the site's format but it is still not a well-formatted question. Please consider taking a bit more time to describe your problem with proper and relevant details and specific questions. –  Stephane Jun 4 '13 at 9:52
1  
Dude - as a word of warning. I have a server here with 18 Velociraptors. I just now start removing them all.... replacing them with SAS drives. My need for something STABLE is a lot larger by now than my need for something cheap. Time IS money. Oh, voting to close - not professional capacity. –  TomTom Jun 4 '13 at 9:55
    
@TomTom That's a strange (not to say funny) interpretation of "professional capacity". Shall we throw all questions concerning SATA disks in the close queue automatically in the future? –  Hauke Laging Jun 4 '13 at 13:56
    
@Hauke no, but I wonder how many professional capacity are JURY RIGGING A SAS BACKPLANE WITHOUT TRAYS. Even used, I would expect the OP to actually get trays and put the SATA discs into the backplane. –  TomTom Jun 4 '13 at 14:12

1 Answer 1

You can use SATA drives on a SAS backplane. There's no need for all of the other craziness.

However, I disagree with your approach to doing this "on the cheap". You get what you pay for in this context, and SATA is typically bad news in certain combinations. Nearline-SAS is not much of a price premium, so it may make more sense if you just need capacity.

Also see: How exactly does a SAS SFF-8087 breakout cable work? + RAID/connection questions

share|improve this answer

Not the answer you're looking for? Browse other questions tagged or ask your own question.