Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Our small team is considering buying our first tape drive for backups. However, we are still lacking serious enterprise-grade servers and have to rely temporarily on SATA drives in our rigs. Cost considerations argue against setting up a high-end automatic tapeloader, so our purchasing manager decided to go with a SAS tape drive (LTO 3 or LTO 4) to allow for migration to higher-end gear in the future.

What else do we need besides a SAS backplane and a reverse breakout cable to connect the tape drive to SATA bus on our boxes?

share|improve this question
up vote 6 down vote accepted

Connecting a SAS tape drive to a SATA port will not work.
They are different protocols. Here's a primer.

Can you provide information on the hardware involved?

  • What type of server(s) are you using?
  • What tape drive did you purchase? Some tape drives come bundled with the necessary HBA to accommodate host-connectivity.
  • Is this an internal or external drive?

If using an external SAS tape drive, you should use a dedicated and purpose-built SAS host bus adapter (HBA) with an external SAS SFF-8088 or SFF-8470 port.

enter image description here

share|improve this answer
Have not bought yet, going for an external drive - Quantum, Tandberg and HP AFAIK are on the menu. Thanks a bunch! – user177085 Jun 8 '13 at 15:52
There are HP LTO3/Ultrium 920 drive packages that include the cabling and SAS adapter needed to run. Look for HP part #AG738A. – ewwhite Jun 8 '13 at 16:02

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.