I have few of profiles .pcf files , and I used them in order to automate the vpmclient connection VIA CLI command
- I have WIN XP server
vpmclient connect "customor_alpha"
until now everything is ok
but I have problem with the last of my profiles - area1.pcf
the problem is when I type in CMD window the following ( to create VPN connection )
vpmclient connect "area1"
after 2 second CISCO window will pop up and ask for password , ( username already defined in window )
please advice what could be the problem , why I get the "CISCO PVN window" ? or maybe I have some in correct syntax in my .pcf file ,
I checked the .pcf file again and again and I couldn't find the problem ?
example of area1.pcf ( only example - not my real pcf )
[main] Description=connection to TechPubs server Host=10.10.99.30 AuthType=1 GroupName=docusers GroupPwd= enc_GroupPwd=158E47893BDCD398BF863675204775622C49<SNIPPED> EnableISPConnect=0 ISPConnectType=0 ISPConnect= ISPCommand= Username=alice SaveUserPassword=0 UserPassword= enc_UserPassword= NTDomain= EnableBackup=1 BackupServer=Engineering1, Engineering2, Engineering 3, Engineering4 EnableMSLogon=0 MSLogonType=0 EnableNat=1 EnableLocalLAN=0 TunnelingMode=0 TCPTunnelingPort=10000 CertStore=0 CertName= CertPath= CertSubjectName SendCertChain=0 VerifyCertDN=CN=”ID Cert”,OU*”Cisco”,ISSUER-CN!=”Entrust”,ISSURE-OU!*”wonderland” DHGroup=2 PeerTimeOut=90 ForceNetLogin=