Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I'm starting with GRE tunneling and I got two machines connected between them-self:

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:192.168.168.2  P-t-P:192.168.168.1  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP  MTU:1480  Metric:1
          RX packets:249 errors:0 dropped:0 overruns:0 frame:0
          TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:15672 (15.3 KiB)  TX bytes:6804 (6.6 KiB)

[root@zombie02 network-scripts]# ping 192.168.168.2
PING 192.168.168.2 (192.168.168.2) 56(84) bytes of data.
64 bytes from 192.168.168.2: icmp_seq=1 ttl=64 time=0.015 ms
64 bytes from 192.168.168.2: icmp_seq=2 ttl=64 time=0.014 ms

--- 192.168.168.2 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.014/0.014/0.015/0.003 ms
[root@zombie02 network-scripts]# ping 192.168.168.1
PING 192.168.168.1 (192.168.168.1) 56(84) bytes of data.
64 bytes from 192.168.168.1: icmp_seq=1 ttl=64 time=34.9 ms
64 bytes from 192.168.168.1: icmp_seq=2 ttl=64 time=33.0 ms

--- 192.168.168.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 33.062/33.997/34.933/0.953 ms
[root@zombie02 network-scripts]#

So; both machines can ping each other; but I don't know how can I get the machine 2, to be able to reach the internet of the machine 1:

[root@zombie02 network-scripts]# ping -I 192.168.168.2 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 192.168.168.2 : 56(84) bytes of data.


--- 8.8.8.8 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 4000ms

[root@zombie02 network-scripts]#


[root@zombie01 ~]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.168.2   *               255.255.255.255 UH    0      0        0 tun0
**.47.224.120   *               255.255.255.248 U     0      0        0 eth1
172.18.2.64     *               255.255.255.192 U     0      0        0 eth0
172.16.0.0      172.18.2.65     255.240.0.0     UG    0      0        0 eth0
default         **.47.224.121.s 0.0.0.0         UG    0      0        0 eth1
[root@zombie01 ~]#

[root@zombie02 network-scripts]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.168.1   *               255.255.255.255 UH    0      0        0 tun0
**.254.69.104  *               255.255.255.252 U     0      0        0 eth0
169.254.0.0     *               255.255.0.0     U     0      0        0 eth0
default         192.254.69.105  0.0.0.0         UG    0      0        0 eth0
[root@zombie02 network-scripts]#

I already checked other questions; and I'm reading all the available tutorials, but looks like there is something that I'm not doing.

Thank you in advanced for any help.

share|improve this question

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.