Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

ASA5505 Version 8.4+ (Using 9.1)..

Adding port range for static nat.

object network server_x
 host 123.123.123.123

access-list outside_in extended permit tcp any object server_x range 1000 2000

object network server_x
 nat (inside,outside) static interface service tcp range 1000 2000?? 

.... I'm kind of lost at the static nat part. how do I static nat a port range?

UPDATE #1

I'm still trying to solve this and am having a hard time, I have like 1000 ports to forward for phone system teleworker VoIP phones and I can't do them one port at a time, the ASA5505 config would be huge!

UPDATE #2

I can't do 1:1 Static Nat and then define the range in the access-list. I use the same external IP for many services on different IP address on the inside network.

share|improve this question
    
Same problem here :( –  Chris Andrè Dale Sep 11 '13 at 8:05

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.