Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I may not have enough information for a good answer but here goes. I have a home ubuntu server with one wd 1.5 TB hard drive that was about 1.5 years old. After a 2-week shutdown it wouldn't boot. Couldn't read error messages because this installation never did allow the monitor to work (used ssh only). I tried to plug the drive into another (windows) computer but it wouldn't appear in my computer. It did show up in drive manager (not sure but maybe this is the way an ext-4 drive always acts when you plug it into a windows machine). The data is backed up and not an issue, but should I re-use this drive or replace it? Nothing seems to be physically wrong, no funny sounds or anything.

share|improve this question
add comment

closed as off-topic by Grant, kce, Ward, ewwhite, MadHatter Dec 30 '13 at 16:37

This question appears to be off-topic. The users who voted to close gave this specific reason:

  • "Questions must be relevant to professional system administration. Server Fault is dedicated to professional system and network administrators. End user and enthusiast questions are off-topic (contact your system administrator or hire a professional to help you out). Please see the Help Center for more information." – Grant, kce, ewwhite, MadHatter
If this question can be reworded to fit the rules in the help center, please edit the question.

2 Answers

up vote 0 down vote accepted

Symptoms doesn't look like a unquestionable hard drive physics failure. You should test it first. Try some tools like MHDD or HDDScan to determine if hard drive is usable.

share|improve this answer
    
Could you clarify, I thought this was a logical failure but you think it still could have been physical failure? –  John Aug 26 '13 at 19:31
    
logical failure should have it's cause.. If it's caused by software error/unexpected reboot - you can use the hard drive without any question. But it also might be caused by physics failure (mechanics, electronics, badblocks). You should test the hard drive to see if it's usable. –  DukeLion Aug 27 '13 at 8:59
add comment

Boot from a USB stick/LiveCD and see if you can access it.

Windows is not going to tell you squat, you should be able to run an fsck on it from the LiveCD and see if it's good.

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.