Could Not Install Nameserver [closed]

Question

I'm a total newbei on all this DNS stuff. I installed the BIND9 ISPConfig and nginx I defined some nameservers for my account via my domain provider's panel (Natro) which is ns1.ostimdenevar.com and my ip is 37.148.208.22. My problem is: I cannot reach my domain but my ip works. I checked my config with http://www.intodns.com/ostimdenevar.com

It says: ERROR: One or more of your nameservers did not respond: The ones that did not respond are: 37.148.208.22 37.148.208.32

I tried to configure that via ISPConfig. But error didnt change. I tried to configure bind manually but no change.

I dont a way to fix this problem or even dont know where to look. Where should I start?

This is the bind config files that I use now:

File: named.conf.local

    zone "ostimdenevar.com" {
         type master;
         file "/etc/bind/db.ostimdenevar.com";
    };

File: db.ostimdenevar.com

;
; BIND data file for local loopback interface
;
$TTL    604800
@       IN      SOA     ns1.ostimdenevar.com. root.ostimdenevar.com. (
                          1         ; Serial
                     604800         ; Refresh
                      86400         ; Retry
                    2419200         ; Expire
                     604800 )       ; Negative Cache TTL
;
@       IN      NS      ns.1.ostimdenevar.com.
ns      IN      A       37.148.208.22

File: named.conf.options

options {
    directory "/var/cache/bind";

    // If there is a firewall between you and nameservers you want
    // to talk to, you may need to fix the firewall to allow multiple
    // ports to talk.  See http://www.kb.cert.org/vuls/id/800113

    // If your ISP provided one or more IP addresses for stable
    // nameservers, you probably want to use them as forwarders.
    // Uncomment the following block, and insert the addresses replacing
    // the all-0's placeholder.

     forwarders {
            89.19.21.250;
     };

    auth-nxdomain no;    # conform to RFC1035
    listen-on-v6 { any; };
};

Answer 1

First look at this, your NS record has an extra . (dot)

ns.1.ostimdenevar.com should be ns1.ostimdenevar.com

your A record, should be "ns1" and not "ns" to match up with the NS record.

in short:

$TTL    604800
@       IN      SOA     ns1.ostimdenevar.com. root.ostimdenevar.com. (
                          1         ; Serial
                     604800         ; Refresh
                      86400         ; Retry
                    2419200         ; Expire
                     604800 )       ; Negative Cache TTL
;
@       IN      NS      ns1.ostimdenevar.com.
@       IN      NS      ns2.ostimdenevar.com.
ns1     IN      A       37.148.208.22
ns2     IN      A       37.148.208.32

Besides the errors in the zone file, you have an ip there: 37.148.208.32 which I do no see in your zone file, so add that as ns2.ostimdenevar.com.

Also if this is @home or @work, using NAT. Do not forget to forward port 53 to whatever server that is taking care off your dns.