Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm having (what I suspect is) a route issue with an OpenVPN implementation and a Windows 7 client. The VPN connection looks to establish itself just fine, and the route is available however efforts to ping resources on the remote side are unsuccessful. Can anyone spot an error in my configuration?

Client Configuration

dev tap
remote xx.xx.xx.xx
proto tcp-client
tls-client
ca ca.crt
auth-user-pass
pull
nobind
persist-key
resolv-retry infinite
verb 3
script-security 2 system
route-method exe
route 192.168.0.0 255.255.255.0 172.16.0.1
auth-nocache

Results of route print

===========================================================================
Interface List
 33...00 ff 18 f4 2a cb ......TAP-Windows Adapter V9
 17...c4 85 08 07 7d 59 ......Microsoft Virtual WiFi Miniport Adapter #2
 15...c4 85 08 07 7d 58 ......Intel(R) Centrino(R) Advanced-N 6235
 13...ac 16 2d 4b e9 f3 ......Realtek PCIe GBE Family Controller
  1...........................Software Loopback Interface 1
 35...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
 57...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
 60...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
 19...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
 39...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0         10.0.0.1       10.0.0.191     25
         10.0.0.0    255.255.255.0         On-link        10.0.0.191    281
       10.0.0.191  255.255.255.255         On-link        10.0.0.191    281
       10.0.0.255  255.255.255.255         On-link        10.0.0.191    281
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
       172.21.0.0    255.255.255.0         On-link       172.21.0.20    286
      172.21.0.20  255.255.255.255         On-link       172.21.0.20    286
     172.21.0.255  255.255.255.255         On-link       172.21.0.20    286
      192.168.0.0    255.255.255.0       172.16.0.1       10.0.0.191     26
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link       172.21.0.20    286
        224.0.0.0        240.0.0.0         On-link        10.0.0.191    281
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link       172.21.0.20    286
  255.255.255.255  255.255.255.255         On-link        10.0.0.191    281
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
          0.0.0.0          0.0.0.0      192.168.1.1  Default
===========================================================================

interface opvn-server export output

# aug/26/2013 16:07:54 by RouterOS 6.1
# software id = CQF8-TUWW
#
/interface ovpn-server server
set certificate=cert2 mode=ethernet
share|improve this question
    
Please provide mikrotik output for ovnp-server. In terminal enter next command: interface ovpn-server export Also remember that Mikrotik doesn't support UDP and compression for tunnels. Mikrotik: OpenVPN Configuration Step by Step Mikrotik OpenVPN server / Windows 7 client –  iDen Aug 26 '13 at 19:34

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.