Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a 10G XPF+ optical cable with market updates from a stock exchange. This cable goes into a switch, which then mirrors every packet to a couple of computers over two ports. The problem with using a switch for mirroring is that there is latency overhead, even with a pass-through switch (~200ns).

Are there "optical" solutions (I'm thinking of a beam splitter of some sort) which would allow for close to zero latency 10G mirroring?

share|improve this question
10  
You HFAT guys are so crazy. –  Tom O'Connor Sep 9 '13 at 12:20
    
There is a solution... I know of a couple of devices that would help you bypass the switch. What devices are in use here? Arista? –  ewwhite Oct 25 '13 at 22:31
    
@Randomblue I'm under NDA... but I'll update as soon as I can speak about it. –  ewwhite Oct 25 '13 at 22:46
    
Okay. I can talk about it. See my answer. –  ewwhite Oct 26 '13 at 0:22
add comment

3 Answers

up vote 5 down vote accepted

My old firm manufactures a port replicator that solves the problem you're having. It's a Layer 1 device that can take a market data feed and multiplex to a number of ports at <10ns latencies. This bypasses the Arista switch for one-way market data consumption.

share|improve this answer
add comment

Are there "optical" solutions (I'm thinking of a beam splitter of some sort) which would allow for essentially zero latency 10G multicast?

No.

share|improve this answer
7  
Ye' cannae' break the laws of Physics, Jim! –  tombull89 Sep 9 '13 at 12:09
    
"beam splitter" effectively splits the photon stream, so only half the photons goes each way. this possibly breaks the signal sent. Amaright ? –  Kwaio Sep 9 '13 at 12:18
    
@Randomblue - certainly prismatic optical networking adds VERY little, not zero, but very little latency to the equation - the issue here though is that you still need to turn the data into regular ethernet and there's no real way of doing that without some form of switch involved - which inherently brings latency. Bay Networking used to sell a range called ONS that was designed for just this thing but I think that line got dropped or sold-on when they went bust - perhaps you could look around as I'm sure there are better products to use than 'regular' switches. Good luck. –  Chopper3 Sep 9 '13 at 12:22
    
@Randomblue I'm not sure I see your point - even light has a finite speed. –  Dan Sep 9 '13 at 12:22
4  
@Randomblue If you come into chat, we've started compiling a list of people who've asked Chopper3 direct questions and then disappeared. I'd suggest locking your doors. –  Dan Nov 8 '13 at 11:32
show 5 more comments

Yes, port mirroring is possible using network taps, with latency an order of magnitude less than a using a switch. There is a video demonstration here.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.