Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am trying to configure Cisco ASA 5510 firewall to allow access from LAN to DMZ web server. Web server is located in the DMZ and is using port 8080. I don't want users to type port number every time they try to access the site. So it should forward from 80 to port 8080. I have already done it to outside access. When outside users try to access the web server the port forwarding works but it doesn't work for LAN users. I have used ASDM to do that. Can you help to figure it out? What would be the command to fix that? Thank you.

share|improve this question
    
Just curious - Why are you running a web service on 8080 in production in the first place? Why not run it on 80 and simplify your config? –  MDMarra Sep 18 '13 at 18:34
    
it is not a production enviroment. there are two web servers on that box, one is using 80 and another 8080 –  Sean Kilb Sep 18 '13 at 18:43
    
If you forward/translate 80 to 8080, then internal users will never be able to access the web server that exists on port 80. –  cpt_fink Sep 20 '13 at 2:53
add comment

Know someone who can answer? Share a link to this question via email, Google+, Twitter, or Facebook.

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.