Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am trying to inventory hard disk information remotely (serial number, disk size, manufacturer...) but am having trouble. I know the drive(s) are configured under a raid controller, but can I view this information without rebooting? So far I've tried the following:

format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
   0. c0t2d0 <DEFAULT cyl 8872 alt 2 hd 255 sec 63>
      /pci@0,0/pci1022,7450@2/pci1000,3060@3/sd@2,0




iostat -E
sd0       Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: AMI      Product: Virtual CDROM    Revision: 1.00 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 4 Predictive Failure Analysis: 0
sd2       Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: TEAC     Product: DV-28SL          Revision: 1.0A Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 6 Predictive Failure Analysis: 0
sd3       Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: AMI      Product: Virtual Floppy   Revision: 1.00 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 4 Predictive Failure Analysis: 0
sd5       Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: LSILOGIC Product: Logical Volume   Revision: 3000 Serial No:
Size: 73.00GB <72999763456 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0




cfgadm -alv
Ap_Id                          Receptacle   Occupant     Condition  Information
When         Type         Busy     Phys_Id
c0                             connected    configured   unknown
unavailable  scsi-bus     n        /devices/pci@0,0/pci1022,7450@2/pci1000,3060@3:scsi
c0::dsk/c0t2d0                 connected    configured   unknown    LSILOGIC Logical         Volume
unavailable  disk         n            /devices/pci@0,0/pci1022,7450@2/pci1000,3060@3:scsi::dsk/c0t2d0
usb0/1                         empty        unconfigured ok
unavailable  unknown      n        /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:1
usb0/2                         empty        unconfigured ok
unavailable  unknown      n        /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:2
usb0/3                         connected    configured   ok         Mfg: American     Megatrends Inc.  Product: Virtual Keyboard and Mouse  NConfigs: 1  Config: 0  <no cfg str     descr>
unavailable  usb-device   n        /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:3
usb1/1                         connected    configured   ok         Mfg: American     Megatrends Inc.  Product: Virtual Cdrom Device  NConfigs: 1  Config: 0  <no cfg str descr>
unavailable  usb-storage  n        /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:1
usb1/2                         connected    configured   ok         Mfg: American     Megatrends Inc.  Product: Virtual Floppy Device  NConfigs: 1  Config: 0  <no cfg str descr>
unavailable  usb-floppy   n        /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:2
usb1/3                         empty        unconfigured ok
unavailable  unknown      n        /devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:3



prtdiag
System Configuration: Sun Microsystems Sun Fire X4200 Server
BIOS Configuration: American Megatrends Inc. 080010  08/10/2005
BMC Configuration: IPMI 2.0 (KCS: Keyboard Controller Style)

==== Processor Sockets ====================================

Version                          Location Tag
-------------------------------- --------------------------
Dual Core AMD Opteron(tm) Processor 275 H0
Dual Core AMD Opteron(tm) Processor 275 H1
Dual Core AMD Opteron(tm) Processor 275 H2
Dual Core AMD Opteron(tm) Processor 275 H3

==== Memory Device Sockets ================================

Type    Status Set Device Locator      Bank Locator
------- ------ --- ------------------- --------------------
DDR     in use 0   H0_DIMM0            BANK0
DDR     in use 0   H0_DIMM1            BANK1
unknown empty  0   H0_DIMM2            BANK2
unknown empty  0   H0_DIMM3            BANK3
DDR     in use 0   H1_DIMM0            BANK4
DDR     in use 0   H1_DIMM1            BANK5
DDR     in use 0   H1_DIMM2            BANK6
DDR     in use 0   H1_DIMM3            BANK7

==== On-Board Devices =====================================
 LSI serial-ATA #1
 Gigabit Ethernet #1
 Gigabit Ethernet #2
 ATI Rage XL VGA

==== Upgradeable Slots ====================================

ID  Status    Type             Description
--- --------- ---------------- ----------------------------
0   in use    PCI-X            PCIX SLOT0
1   available PCI-X            PCIX SLOT1
2   available PCI-X            PCIX SLOT2
3   available PCI-X            PCIX SLOT3
4   available PCI-X            PCIX SLOT4



raidctl -l
Controller: 0
    Volume:c0t2d0
    Disk: 0.2.0
    Disk: 0.3.0
share|improve this question

1 Answer 1

As this is an LSI controller, you should be using the MegaCLI command line utility to retrieve information about the physical drives attached:

./MegaCLI -PDList -aAll
share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.