Our Dell PowerEdge R710 enters BIOS setup during each boot. We have to press Esc to continue booting. How can we ensure that the server boots without user intervention?
During POST the server does not print any suspicious messages. In the setup we have not found any settings which could be related to the problem. The BIOS version is 2.1.15. The problem appears both on the local console and when connected over iDRAC.
The only suspicious message during boot is:
BIOS installed successfully! but most probably this is a message of the BIOS of the Adaptec RAID 2405 controller. Then iDRAC 6 shows its messages and then the BIOS setup shows up.