Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I know that you cannot do an upgrade from x86 to x64. What I need/want to do is re-install Server 2008 on a machine to "upgrade" to the 64-bit version.

My question is, how do I handle this in the best possible way as not to disrupt the services running on the server?

The server is currently running AD, DNS, DHCP and it's also home for users redirected home folders.

My constraints are the following.

  • This is the only server running
  • I can install another server temporarily to ease the process Edit:( this would likely be in a vm on one of the workstations.)

Edit: it's a fairly low "traffic" server, about 10 clients.

share|improve this question
    
You can or can not install another server? –  mrdenny Aug 17 '09 at 8:28
add comment

1 Answer 1

up vote 4 down vote accepted

This is going to be fairly difficult, but the only thing you can do to guarantee uptime is to set up a temporary 2nd server (I'm guessing this will be a recomissioned workstation... good luck with that!) and set it to do EVERYTHING that the current server is doing.

Set it up as a full AD controller, replicating eveything. Set up its DHCP, DNS, WSUS, anything at all that the first server is doing. Test, test and then test again. Using DFS synchronise the folder redirection to the new server.

Then, unplug the main server from the network. Ensure that everything works. Do more testing. Before you nuke the server, leave it for 24 hours, unplugged, to make sure that no last-minute issues arise (use this time wisely - make an image of the server using Ghost or similar so if it all goes to shit you can roll back easily).

Now, you can set about re-building your server. Once it's rebuilt, one by one transfer services back to it. Join it to do the domain, promote it to a domain controller, replicate everything back to it, re-sync the DFS, etc etc.

Once you're sure everything is working again, unplug the temporary server. Keep it on hand for a few days to make sure that everything is OK before you nuke it back to its original state.

If you can, its probably best if you pull an all-nighter to do the switchovers (both of them). Doing it in the middle of the night means that there's little chance of someone trying to access something during the transition process, and if it doesn't work you can stop, roll back, get some sleep and try again the next night.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.