Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

On our server (M$ 2003) is it possible to directly read our LTO 4 tape drive and copy the entire ntbackup created bkf file on it to an external hard disk?

(Is the tape backup even stored on a tape as a bkf file, I’m going off when we only used external usb HD’s.)

share|improve this question
    
What software is being used to create the backup? –  Kara Marfia Aug 18 '09 at 12:03
    
It would be helpful if you explained what backup software you to create the LTO 4 tape backup. –  Aaron Aug 18 '09 at 12:03
    
I didn't set it up, but I thought it was just NTBackup no other software. –  John Aug 18 '09 at 12:10
    
-1 for use of '$' to represent MS –  Bryan Apr 5 '10 at 11:37

1 Answer 1

Backup tapes work a little bit differently than your average read-write media . They typically contain proprietary information regarding their format and the data. You usually need to use a program that can understand this format to recover the data -- rather than just "read" from the tape as you might a CDRom or Harddrive with Windows Explorer.

To recover the files contained within your backup set from the tape, you will need to use NTBackup (or Veritas BackupExec, which can read NTBackup files). You will not directly be able to restore from tape to a BKF format that you may be familiar with NTBackup using for backup to disk scenarios.

The data that is written to tape actually is stored in Microsoft Tape Format (MTF), so any software that can read MTF can recover your data.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.