Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

So I've been attempting to use Microsoft Deployment Toolkit with Windows Deployment Services to deploy images on a client. The deployment server is running Server 2012 and is both the Domain Controller and the deployment server. I am able to import Windows 7 enterprise, office 2013, some drivers, etc. Then I added a task sequence according to this article:

http://prajwaldesai.com/deploying-windows-7-using-microsoft-deployment-toolkit-part-1/

Most of the process of setting up the deployment share was either the same or very similar to that article.

Now, when I PXE boot to the right image on the deployment share, I get a prompt to login, etc. Eventually I come to a task sequence page, where, in order to continue, I must select a task sequence to execute. Only no task sequences appear. I checked back in MDT, and the task sequence is there and enabled. The task is supposed to format the hard drive and install windows 7.

So I was wondering, as I am still quite new and inexperienced with MDT+WAIK+WDS, is this task sequence supposed to be hidden?

I read a few forum threads about task sequences which had previously been visible suddenly dissapearing, but that doesn't seem to describe my problem.

Also, I tried deleting the task sequence and creating a new one, but the same issue occured. I also noticed that the Task Sequence ID of 001 was no longer available. Are these IDs only one-time uses per deployment share?

This domain is a small cluster of computers set up specifically to test this deployment solution to see if it would be appropriate to implement for the entire lab, so any other solutions which might be appropriate would be appreciated. The goal is to deploy images of windows 7 with standard applications. Every year this image is rebuilt with updated applications and re-captured using Ghost, which we are trying to ditch. Being able to re-create the image using MDT would make things a lot easier, and would increase flexibility if, for example, I had to add an application in after the image has been deployed.


So another update, I apologize, but I keep hitting my head against the wall trying to figure this out.

I still am unable to see the Install OS Task Sequence when I PXE boot the client. In MDT I have 4 task sequences, each performing a specific function. It seems like I can see any task sequence which does not deploy an OS. So I have a sequence which wipes the disk, installs windows, installs office, and then syspreps and captures the image. Only I am unable to run the OS Deployment TS in the LTI image. Everything I am running is 64 bit, so I do not believe architecture mismatch is the problem, and in MDT the TSs are enabled and visible. Deployment share is updated and is unrestricted in terms of permissions. The client now has a completely empty, unformatted hard drive. Does anyone know why this task sequence won't show up?

In MDT under the components tab WAIK still isn't listed under "Installed", but it is listed under "Downloaded". I have reinstalled, refreshed, rebooted, etc. But WAIK still doesn't seem to want to be listed as Installed. I googled this, and several other users have this issue, but MDT still seems to work fine, so I'm not convinced that's the problem, or if it is, its not all of the problem.

Again, I really do appreciate the help.

share|improve this question
    
You must update the deployment share in DeploymentWorkbench: right-click on the deployment share object below Deployment Shares, and click Update Deployment Share; although I'm not using 2012. Check this out. –  mbrownnyc Feb 11 at 21:19
1  
Changed around the task sequences, I'll try it and post back with the results. –  Kevin Feb 12 at 17:26
2  
@kevin You didn't mention architecture for your OS or boot images... If you boot to a 64 bit boot image, you will not see task sequences for 32 bit OS installations, however if you boot into a 32 bit boot image, you should see task sequences for both 32 bit and 64 bit OS installs. –  WinOutreach4 Feb 12 at 19:53
1  
I think I got it to work, and I think I know why. So in this test domain, I had three computers. One was the DC server with WDS, DHCP,DNS, ADDS, etc. running. The second was a machine with MDT, WAIK running for making the images, and the third was a test machine for deploying the images on. The deployment share was on the server, and I stupidly had not changed the permissions on that specific folder to make it a share. Changed that and now it seems to be working. –  Kevin Feb 13 at 20:36
1  
Sorry, figured it out. And now I feel like an idiot because it was an architecture mismatch. I thought I had imported a 64 bit version of Windows 7, but by accident I picked up a 32 bit DVD. I think there is a way to enable 32 bit OSs in a 64 bit environment in WDS, but I haven't done that yet. –  Kevin Feb 19 at 0:51

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.