0

I'm running a Supermicro X7DCA board in a NAS server.

Whenever I plug in a sata disk the boot sequence goes out of order.

This is a problem, because it is running headless.

I've had this problem many times before with other consumer motherboards.

How to prevent this?

Improve this question
6
  • Um, which operating system is in use? And what type of SATA disks are you adding? And why?
    – ewwhite
    Feb 20, 2014 at 8:48
  • I'm running FreeBsd (freenas). But the error is at boot on the bios level. Sometimes I just need to plug and unplug things.
    – kareldc
    Feb 20, 2014 at 9:27
  • I don't understand why you'd be adding arbitrary disks to a NAS or even rebooting often enough for this to be an issue.
    – ewwhite
    Feb 20, 2014 at 12:55
  • Is that the X7DCA-3 or the X7DCA-L? Which BIOS revision?
    – Andrew
    Feb 20, 2014 at 13:02
  • It is the X7DCA-3 I will check the bios revision. But there is a newer version available I think. Updating is a pain because I don't have access to dos to make a boot floppy...
    – kareldc
    Feb 20, 2014 at 15:45

3 Answers 3

Reset to default
1

If you have physical access (to add disks) but it's headless, do one of two things (depending on physical constraints):

  1. Attach a KVM
  2. Use a crash cart

If you are only swapping disks the boot order should not change unless there is a BIOS bug; in which case, try updating or reflashing it.

Improve this answer
1

I see the same type of problem with my SuperMicro X7DCA-L with the latest BIOS (R1.2a), though I don't even have to change anything for it to happen. The machine just randomly decides to move things out of the excluded list and/or change the boot order. Sometimes I can reboot several times in a row before it happens, but it happens regularly.

I'm assuming that just like they can't be bothered to properly document their BIOS settings, keep their manuals up to date or package their BIOS updates packages with all of the parts needed to actually install it; they can't be bothered to write a properly working BIOS. This is especially sad given the premium they charge for their products and the market they're supplying.

Improve this answer
1
  • This is an excellent reason to use better hardware. This is what happens when people buy Supermicro versus something a bit more polished. Nagging little issues like clean BIOS upgrades can make a tremendous difference.
    – ewwhite
    Dec 6, 2014 at 8:12
0

Attach a head, press DEL during POST, go into the BIOS Setup, and under the Boot tab modify the boot order to get (I imagine, since you said NAS) USB key to the top.

F10 to save and exit.

General procedure is same for all, specific keys and tabs differ.

Improve this answer
1
  • I need to avoid having to do this every time I attach a sata device (disk).
    – kareldc
    Feb 20, 2014 at 9:28

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .