Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm setting up a server which has got the following configuration:

  1. 2tb hard drive (2 drives) raid-1 configured from bios (hardware
    raid)
  2. 40gb hard drive

I would like to install the swap and the /boot on the 40gb and the / in the 2tb raid. The alternative could be /boot, swap and / in the 40gb and /home in the 2tb raid (as this should be mainly a fileserver)+

The distribution is Zentyal 3.2

How should I partition the disks as Zentyal continues to give me error when trying to install the grub2 (in any part of the hard drive)

Thanks

share|improve this question
2  
That is not hardware RAID, that is fakeraid. –  Michael Hampton Mar 20 at 13:09
    
really? and How to setup hw raid? –  il_maniscalco Mar 20 at 15:03
    
First you go buy an actual RAID HBA. Then you set it up according to its directions. –  Michael Hampton Mar 20 at 15:36

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.