Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have two Asterisk servers,

  1. E1(PRI) Gateway Asterisk 1.4 with E1(PRI) card
  2. IP-PBX Asterisk 1.8 on VM Server

When my e1 gateway is failed (ex. shutdown, no power...), PSTN automatically switch to analog lines

but when my IP-PBX is failed I want to make the gateway to route the call back to the PSTN again and there switch the call to an analog line.

share|improve this question
    
Hi, welcome to SF. What precisely is the question you are asking? – Felix Frank Jun 16 '14 at 13:25
    
which part of my question is not clear to you? – Mohammad Tahmasebi Jun 18 '14 at 9:34
1  
There is no actual question. You only describe your target design. – Felix Frank Jun 18 '14 at 10:16
    
It seems that the question is: HOW to make the gateway to route the call back to the PSTN again and there switch the call to an analog line? – mammadalius Jun 22 '14 at 8:03

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.