4

We have three Ubuntu (trusty) servers taking requests. One of them is having a variety of weird problems that we are trying to find the cause of.

Firstly, we want to rule out hardware differences. So we want to verify that the hardware on all three servers is the same, and that the OS on each sees all the hardware in the same way. Is there a straightforward way to get a summary we can compare from each server? Almost like an md5 checksum of the hardware?

Improve this question
8
  • 3
    You don't know what type of hardware you're running on?
    – ewwhite
    Jul 29, 2014 at 11:59
  • 3
    As we're trying to work out a problem that only appears on one out of three supposedly identical servers, it would seem silly to not double check and rule it out. So no. Until we've double checked, I'm going to say we're not certain of what exact hardware each server is running. Shrug
    – Alex
    Jul 29, 2014 at 12:11
  • 3
    XY Problem? - What are the symptoms exhibited on the problem server?
    – ewwhite
    Jul 29, 2014 at 12:19
  • 2
    What he means by that is you'd rather post the main problem that led you to believe that different hardware could be the cause for your issue.
    – deppfx
    Jul 29, 2014 at 13:22
  • 3
    @LukeCousins I was just trying to be thorough. As you can see, I left an answer with a suggestion on how to acquire this information.
    – ewwhite
    Jul 29, 2014 at 13:45

2 Answers 2

Reset to default
8

Try installing the List Hardware package for Ubuntu.

sudo apt-get install lshw

Run the command

sudo lshw -short

on all three hardware & compare it using Notepad++ after installing its Compare plugin. This is the best and easiest way I can think of. The command above leaves a lot of detail, of course. If you need it in detail you can leave out the -short switch and route the output to a html, xml or txt file as shown below.

sudo lshw > hardware.txt
sudo lshw -html > hardware.html
sudo lshw -xml > hardware.xml

You can also try using an excel sheet. Depends on what you are comfortable with.

Improve this answer
2
  • 5
    If you are already using a GNU/Linux machine you can always use diff. If the files are too large, hash them.
    – bjanssen
    Jul 29, 2014 at 11:56
  • 1
    Or, if you're running a desktop environment, you can use meld, which will do word-diffing, color/highlighting and side-by-side scrolling
    – loopbackbee
    Jul 29, 2014 at 13:17
4

The dmidecode command is likely already installed. Try this:

dmidecode -t 1 | egrep '(Manufacturer|Product|Serial)'; dmidecode -t 0 | egrep '(Version|Release)'; dmidecode -t processor| egrep '(Socket|Version)'

I'd be interested in seeing the output...

However, if you're having stability issues, hardware differences probably aren't the issue. Is this a hosting environment? If so, they're likely using lower-end or hand-assembled (cough... Supermicro) equipment. You may want to see if there are any messages in the kernel ring buffer (dmesg | tail) on the problem server.

The type of equipment in use by these providers typically doesn't have any form of hardware monitoring available. You may have out-of-band options like IPMI, but it's not as tightly integrated with the sensors/components on generic hardware.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .