Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

An interesting question. I have logged into a Linux (most likely SuSE) host. Is there some way that I can tell programmatically that I am a VM host or not?

Also assume that the vmtools are not installed.

share|improve this question

12 Answers 12

up vote 22 down vote accepted

Use standard Linux tools to inspect the hardware on the system.

cat /proc/scsi/scsi


ethtool -i eth0


dmidecode | grep -i vmware

If the output of these commands shows hardware with a manufacturer name of "VMWare", you're on a VMWare VM. Multiple commands are provided here because system configurations and tools differ.

share|improve this answer
Can you explain what these commands do, instead of only providing vague commands? – Stefan Lasiewski Jun 4 '14 at 19:33
Thanks. cat /proc/scsi/scsi is nice because it seems to be available everywhere and doesn't require to install new software or run with privileged rights. – tiktak Dec 16 '14 at 12:38
@tiktak I don't see /proc/scsi/scsi on my Debian 7 box... – Kyle Strand Jun 8 '15 at 15:44
facter virtual 

indicates that it’s a VM. If it returned “physical” then the opposite is true (not a VM), eg:

facter virtual
share|improve this answer
However, this is a non-standard special package....but I like it. – mdpc Jan 22 '13 at 19:36
@mdpc It should be present on any system using puppet. – Michael Hampton Jul 22 '13 at 6:59

There is a handy app that might help called virt-what. I haven't used it with VMWare, but it did work nicely with Qemu.

share|improve this answer
Unfortunately the binary RPM has two dependancies dmidecode and util-linux-ng when tried on SuSE commercial. – mdpc Sep 16 '09 at 17:49

You might be able to get and idea by looking around under /sys. For example /sys/class/dmi/id/sys_vendor has a value of VMware, Inc..

If it is installed you can use lshw. The command lshw -class system returns this on my system:

    description: Computer
    product: VMware Virtual Platform
    vendor: VMware, Inc.
    version: None
    serial: VMware-...
    width: 64 bits
    capabilities: smbios-2.4 dmi-2.4 vsyscall64 vsyscall32
share|improve this answer
On the SuSE instances that I have access to lshw does not exist. Further, the /sys/class/dmi/... does not exist. – mdpc Sep 15 '09 at 23:53

Some virtual environments name some of their virtual devices with names that are a bit tell-tale, for example, VirtualBox presenting a graphics card that calls itself "VirtualBox Display Adapter". But looking for those ties you to a particular VM and possibly a narrow range of versions.

It might be possible for your code to see what sort of virtualisation it could set up. If that fails entirely, you might be in a VM. But you just as might easily be on a box that doesn't have any VM capable hardware.

share|improve this answer
Your first answer was the right one. Check device driver names. – Izzy Sep 15 '09 at 23:47

You could also search the first part of your mac address here and see if it's listed as assigned to any of the virtualization companies.

share|improve this answer
Interesting idea....I think that works (as long as a network device is included in the VM ;-)) – mdpc Sep 16 '09 at 18:18
Won't be reliable. In many cases the mac can be set to an arbitrary value. This to enable cloning the mac of the original machine when converting it to VM. Some software ties its license to the mac and often it is impossible to get a new license (vendor went bust or costs is prohibitive). – Tonny Jan 22 '13 at 20:24

There's lots of code out there to detect if you're in a VM or not. Start with red pill and search from there. This paper at Offensive Computing is also a good read.

That's if none of those easy ones above work :)

share|improve this answer

For Linux you type dmesg |grep DMI:


[root@myhost ~]# dmesg |grep DMI
DMI 2.3 present.
DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006  05/23/2012

[root@myhost ~]# dmesg |grep -i virtual
DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006  05/23/2012
Booting paravirtualized kernel on bare hardware
input: Macintosh mouse button emulation as /devices/virtual/input/input1
scsi 0:0:0:0: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 4
input: Microsoft Vmbus HID-compliant Mouse as /devices/virtual/input/input4


[root@backdev1 ~]# dmesg |grep DMI
DMI 2.5 present.
DMI: IBM System x3650 M3 -[7945AC1]-/90Y4784, BIOS -[D6E153AUS-1.12]- 06/30/2011
share|improve this answer
a major problem with your solution is that dmesg reads out the kernel buffer and it is of limited size. If there are a lot of messages or a bit of time since the system has been rebooted, then this information will not be available. – mdpc Apr 10 '14 at 20:05

Virtual devices will also be revealed by lspci and/or disk device info in /proc:

lspci | grep -i vmware

grep -i vmware /proc/scsi/scsi /proc/ide/*/model
share|improve this answer

I didn't like any of these solutions, as there's usually a VMware CDROM driver or memory driver installed so dmesg confirms or denies it for me quickly.

[server@user ~]$ dmesg |grep VMware
hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
Vendor: VMware    Model: Virtual disk      Rev: 1.0
Vendor: VMware    Model: Virtual disk      Rev: 1.0
Vendor: VMware    Model: Virtual disk      Rev: 1.0
Vendor: VMware    Model: Virtual disk      Rev: 1.0
Vendor: VMware    Model: Virtual disk      Rev: 1.0
Vendor: VMware    Model: Virtual disk      Rev: 1.0
Vendor: VMware    Model: Virtual disk      Rev: 1.0
VMware memory control driver initialized
share|improve this answer
This will work at startup, but later you can't guarantee that dmesg hasn't been cleared or overflowed. – mattdm Feb 3 '11 at 14:57
This is what I usually do too, that is grepping dmesg – hyphen this Aug 18 '14 at 13:53

In Linux, system information is revealed in /sys/devices/virtual/dmi/id/ . See my answer here for a handy script to show you all the information available.

root not required.

share|improve this answer

This worked better for me as it gives me specific information about the manufacturer and the product name.

dmidecode -t system|grep 'Manufacturer\|Product'

Output on Dell server:

Manufacturer: Dell Inc.
Product Name: PowerEdge C5220

Output on Virtualbox VM:

Manufacturer: innotek GmbH
Product Name: VirtualBox

Output on KVM/QEMU:

Manufacturer: QEMU
Product Name: Standard PC (i440FX + PIIX, 1996)

This is great for scripts that can parse these out for better identification of servers... but if you use Chef in your infrastructure, you can check the node attribute Virtualization -> system in the chef server .

share|improve this answer

protected by Michael Hampton Sep 10 '15 at 20:54

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.