I currently am running two exchange servers. I am running an Windows 2003 server with Exchange 2007 and I am also running a windows 2003 with Exchange 2003. I am adding two new Windows 2008 R2 servers that will be running Exchange 2010 (64 bit). My master schema server 2003 (32bit)
During the install of exchange everything is going smoothly until I get to the organization prep. At this point of the install I am getting the following error:
The following error was generated when "$error.Clear(): install-ExcchangeSchema - LdapFileName (&roleInstallPath + "Setup/Data/"+$RoleSchemaPrefix + "schema0.ldf")
"was run: "C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema0.ldf:.
C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema0.ldf
In researching this error I found the following article that told me to insert the exchange 2010 DVD into my schema master server and run some command prompts.
This article is linked from previous article and has the command prompts I am using
http://www.petenetlive.com/KB/Article/0000442.htm
I have done this and tried to run the command it suggests but I get the following error
Command: Setup /PrepareLegacyExchangePermissions
When I run this command on the schema master server I get the following error.
C:\Windows\MSexchange2010>setup /PrepareLegacyExchangePermissions The image file C:\Windows\MSexchange2010\setup.com is valid, but is for a machine type other than the current machine
My Exchange install is 64 bit and my schema server is 32 bit. Could this be the problem? Any other suggestions on resolving this issue would be appreciated