1

I have an IBM x3950M2 (72236MU) server that was running Server 2012.

I decided to swap some drives around and reinstall from scratch with Server 2012r2. However I am unable to get the windows installer to recognize that there's any drives in the system.

I have downloaded the latest RAID driver from here: http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5092020

The system originally had two drives in it, and they do not appear to have been in any sort of raid array. I have tried using a RAID 1 setup, but also tried with the two original disks.

I'm installing the OS and driver from a USB key. It loads windows setup and detects no disks. No biggie, I point it to where I saved the RAID drivers on the USB key, but then still no luck, it's not detecting any disks. The RAID webbios sees the disks just fine.

It's friday, and my brain is fried. My google-fu is failing me, and I'm out of solutions. Help!

edit: I am extracting drivers from the downloaded driver EXE file and putting them on the thumb drive. I'm certain it's the correct driver- when I boot into webbios for the raid controller it lists itself as "IBM ServeRAID-MR10k SAS/SATA Controller", and the driver shows up in windows as the exact same.

Improve this question
3
  • Did you extract the raid drivers from the .exe onto the thumb drive? Are you 100% sure that that is the correct driver?
    – pxed
    Jan 16, 2015 at 22:27
  • Yes, extracted raid drivers from the exe. And yeah - in webbios the raid controller is "IBM ServeRAID-MR10k SAS/SATA Controller", and the driver reads exactly the same. This should be straight forward, I've loaded RAID drivers before. I'm wondering if I'm missing something stupid here.
    – jeremy
    Jan 16, 2015 at 22:35
  • DId you solve this somehow ? I face the same problem with an x3850M2, even with the latest MegaRaid Drivers.
    – Peter Sawatzki
    Sep 19, 2015 at 13:28

2 Answers 2

Reset to default
1

Sadly, the resolution here is to just use Server 2012 (not R2).

I eventually spoke to someone who said that you can't get this to work with R2.

Improve this answer
1

The Problem seems not to be restricted to the RAID Controller (MR10 in my 3850M2): I tried two Adapted SAS Controller in this Server and also two QLOGIC SAN Controller, all Show no disks during Setup.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .