Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We've been running Cisco and dell layer 3 switches. The former are expensive and reliable, the latter a lot cheaper and fraught with issues. Anyone has positive experience with the core Force10 switches (and edge switches as well)?

share|improve this question

closed as off-topic by Matthew Ife, mdpc, Mark Wagner, Ward, Nathan C Jul 2 at 18:36

This question appears to be off-topic. The users who voted to close gave this specific reason:

  • "Questions seeking product, service, or learning material recommendations are off-topic because they tend to become obsolete quickly. Instead, describe your situation and the specific problem you're trying to solve." – Matthew Ife, mdpc, Mark Wagner, Ward, Nathan C
If this question can be reworded to fit the rules in the help center, please edit the question.

    
What kind of issues have you had with the Dell switches? I've been running a PC6024 for about 3 years with no problems. –  joeqwerty Dec 4 '09 at 3:27
    
Seconded about Dell switch reliability. We have three stacks of 6x PowerConnect 6248P (18 total) for our client access layer. They've all been rock solid for three years. The web-based configuration GUI is very clunky, but otherwise they just plain work. Stacking, failover, multi-chassis link aggregation, etc. all "just work." –  rmalayter Sep 27 '11 at 18:37
    
Load on the dell switches would rise and stay pinned without any good explanation. It's been over 2 years so I don't have the details handy... –  Alexis Lê-Quôc Dec 1 '11 at 22:40
add comment

2 Answers

up vote 1 down vote accepted

Force10 makes excellent switches, especially at higher throughput (10 gigabit gear) and predominantly figure in the high performance computing space. You should look carefully at what protocols you are expecting to run though if there is anything esoteric. The other vendors Cisco in particular but also Juniper have much more complete protocol support.

share|improve this answer
add comment

Not personally, although friends in the supercomputing realm quite like them.

I'm a fan of the Juniper EX4200 switches, although unless you have a good vendor they're not that much cheaper then Cisco.

HP could be another option for simple stuff.

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.