Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I want to boot a CD on the given server.

It's only booting via network.

F10 or F9 on Compaq logo screen doesn't work, neither F1.

share|improve this question
    
Just to confirm, this is a Compaq G1 or G2? or was this after the HP Mergers and therefore a G3/4/5/6 ? –  Ben Short Oct 12 '09 at 10:47
    
What steps have you taken before posting here? What Generation is you DL580? Have you read the manual? –  PEra Oct 12 '09 at 10:48
add comment

2 Answers

If this is a G1 server (white/beige-colored DL580 with Compaq logos), the BIOS is actually supposed to be a special partition on the hard drive. This is installed via the appropriate Compaq Smart Start CD of the era (v5.x, I think). Without this system partition or the Smart Start CD, you won't have BIOS access.

share|improve this answer
add comment

It's a vague questions, and I'm at home so not gonna reboot anything remotely right now...

Here's a recent user guide for the ROM-Based Setup Utility (pdf)

The details will be different depending on what generation the server is, but it looks like you could go in and take out the optical drive as possible IPL location.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.