Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm currently using a linux box to handle my firewall/NAT using iptables. It has two NICs, one link to a LAN switch, one to our egress Internet provider. I'm looking at upgrade this box to two boxes for purposes of redundancy and adding a second Internet provider to the solution. This means I need four ports I believe (correct me if I'm wrong)

  1. Egress internet link #1
  2. Egress internet link #2
  3. LAN port
  4. Cross-over between the two boxes for failover purposes

I've read carp+pfsync is a good solution. Is that currently what most of you are using? Is there an equivalent solution in linux?

What are some suggestions for hot failover with ease of configuration as of today for a similar setup as above?

share|improve this question
up vote 9 down vote accepted

I've read carp+pfsync is a good solution. Is that currently what most of you are using?

Yes and yes :)

As Instye notes, there are two public projects for CARP under Linux. But as you'll notice neither of them are particularly active and don't believe they include pfsync. Which is pretty important to the whole shebang.

Additionally there have been some huge advances in the PF and CARP code this year alone. Any port, including FreeBSD, often lags naturally behind in feature and bug fixes.

If the current machine isn't performing any other tasks then I'd recommend just biting the bullet and implementing OpenBSD. The learning curve won't be any steeper than getting one of the ports up and running. I don't think you'll regret it.

share|improve this answer

CARP is available in linux. Check out the ucarp project for a user-space implementation and there is apparently a project porting it to the 2.6 kernels:

share|improve this answer

The web page you probably want to start looking at is linux-ha. One of the tools they offer is the heartbeat program that can be used to fail servers over.

share|improve this answer

ucarp and keepalived from linux-HA have been mentioned... the missing link is therefore a linux equivalent of pfsync: well look at conntrackd from conntrack-tools

share|improve this answer

if you're not dead set on your linux distro, you could look into vyatta, the community edition is free

share|improve this answer

The Linux equivalent would be using conntrack-tools to sync connection tracking state, and then iptables of course.

share|improve this answer

You could also run OpenBSD on your boxes and simply use CARP + pf "out of the box".

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.