Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Further to this question about Blade vs Rack servers I wanted to check some stories I have heard.

Are Blade servers much noisier than regular rack servers? (or was that just when they first came out?)

also, how much more cooling equipment do they need?

NB: I'm probably talking about 1 chassis with 7 or 8 blades in it, compared to 7 or 8 normal rack servers. Not huge numbers of servers.

share|improve this question

5 Answers 5

up vote 6 down vote accepted

I would say anecdotally yes. They are more noisy. Although often more efficient in terms of overall power consumption, the act of pulling and pushing air through passive modular components with large front and rear facing blowers is always likely to create more noise.

Blades shouldn't need any external cooling equipment. Just a hot and cold aisle to deploy in ideally. The chassis takes care of the rest.

share|improve this answer
    
I am inclined to say no. Not noisier. More sense thus noisier in abssolute terms, but not noisier "per watt" or "per comutational unit". –  TomTom Feb 13 '12 at 13:38

Blade servers are usually pretty silent - it's the fans in the enclosures that are noisy.

A single blade in an enclosure will be noisier than a single pizza-box server but a full blade enclosure should be quieter than the same number of pizza-box servers added up.

share|improve this answer

When we put in the HP Bladeserver rack back in 2005 the noise level in the datacenter increased markedly. What's more, the fans on that particular rack system had a particular whine harmonic that really drove me nuts. I brought my shooting earmuffs to work for when I need to be in there for any length of time.

That said, HP has seriously re-engineered their blade racks, so this may no longer be true.

share|improve this answer

It depends.

I have some HP C3000 chassis, and when their fans are spooled up you can hear them through a door and down two flights of stairs. When the fans are throttled back, they are no noiser than any other relatively-powered pile of computers.

As far as cooling goes, a full chassis will use denser power-per-rack-unit, and will require correspondingly more cooling.

share|improve this answer

Most blades have smaller fans running at higher RPMs, to move the required amount of air, than a typical 2U+ rackmount server. Therefore, they tend to (all else equal) make more noise than rackmount servers (other than 1U boxen, which also have tiny fans).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.