Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

We are using Cables Unlimited USB-2925 USB-to-Dual-DB9 serial cables, which use the Moschip MCS7720 controller. We have downloaded the newest driver from, but that driver was last updated in 2005. It does not seem to be working with Macs running OS X 10.6 Snow Leopard.

We have sent emails to the support addresses for both Cables Unlimited and Moschip. Cables Unlimited says they are checking with Moschip. No responses from Moschip yet.

Does anyone know of any updates for this driver, or are there any ways to get the driver to work with Snow Leopard?

share|improve this question
up vote 3 down vote accepted

Update: When MosChip updated their website (and, shortly thereafter, their management), they bounced driver downloads to ASIX Electronics Corp.. The latest(?) available version is v1.0.0.8, dated 08 March 2007, which is the same version as that listed in @pridkett's comment, below, but not the same date (his link says 22 Jan 2010). It's described as being for "10.4 - 10.2", x86 and PowerPC, but who knows...

Here are drivers for other OSes, and drivers for other MosChip / Axis / MCS77xx and MCS78xx chips.

(Thanks to @pridkett for pointing out that the original links had disappeared from MosChip).

share|improve this answer
It doesn't appear the drivers are on MosChip's redesigned site. However this site has a working copy of the drivers: – Pridkett Jun 22 '12 at 14:47

There is a solution to force this exact cable to work with Snow Leopard while waiting for Moschip to update their drivers.

Be very careful while you are making this change. You will need to execute these commands as the root user.

  1. Install the latest driver from Moschip and reboot.

  2. Locate the file /System/Library/Extensions/MCS7720Driver.kext/Contents/Info.plist

  3. Open the file and locate the line that reads <integer>30496</integer>

  4. Change the number from 30496 to 30485. Save the file.

  5. Execute the command "touch /System/Library/Extensions".

  6. Wait a few minutes and plug in your USB cable. You should see a screen pop up that alerts you that two new network interfaces have become available. You'll note that they're named /dev/tty.USB-Serial0.0 and /dev/tty.USB-Serial1.1.

  7. You're good to go. If the software is ever updated by Moschip, it will likely overwrite this change.

share|improve this answer

Unfortunately, I don't have a suggestion for drivers for the controller you're currently using. I've always found the Keyspan High Speed USB Serial Adapter (USA-19HS) to be an excellent product for my USB-to-Serial needs and it is well supported under Mac OS X (including Snow Leopard, although I haven't tested this yet).

share|improve this answer
Prolific-based USB-to-serial adapters work under Snow Leopard, using the open-source driver from – Kristopher Johnson Oct 23 '09 at 17:49

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.