Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm in the process of building a NAS system - It has 8 1TB drives, which I am currently building as a RAID 5 array. It's using a 3ware hardware raid controller.

I've also installed a single 250gb drive into the top of the unit (there is an additional drive bay here) My intention is to use this drive for the OS / boot drive.

How do I go about setting this up? By that, I mean, do i have to set some jumper on the drive / set a setting in the bios, to boot from my single drive, rather than my RAID array? I've plugged the SATA cable from the drive into the mainboard - SATA 0 (i think, at least)

Also, how should I format my RAID array, once it's finished formatting? Should I be using GPT - I will install Windows Server 2008 x64 Standard as the OS on the above mentioned 250gb drive

share|improve this question
    
Duplicate serverfault.com/questions/79643/… You should edit your original question where there are already valid answers rather than start a new one –  MDMarra Oct 30 '09 at 15:17
    
If this is important data, please re-think your RAID strategy - RAID 5 really is not a safe technology with most RAID controllers due to the way parity is not calculated atomically. –  Philip Reynolds Oct 30 '09 at 15:19
    
I believe Phil is referring to the RAID5 Write Hole which also affects RAID6. A battery backed up cache can help reduce this problem but does not eliminate it. I would avoid RAID5 for a different reason. The chances of running into a unrecoverable read error (URE) with that much space is high. With SATA drives this rate is every 10^14 bits or about once every 12TB. So statistically a RAID5 volume of that size will have about a 50/50 chance of failing during a rebuild due to a URE. I would go with RAID6 to avoid this. This doesn't avoid the Write Hole problem though. –  3dinfluence Oct 30 '09 at 16:00
add comment

2 Answers

Generally yes there's a BIOS boot order that you would have to set.

In similar situations I put the OS on two mirrored drives and the data on RAID 5 (or something appropriate).

You will have to use GPT, as MBR stops at 2TB, and you will have 7.

As a note of caution, we've had more 1TB disks fail than any smaller disk size; I would practice how failover works before going production with this.

share|improve this answer
add comment

There should be a boot order setting in the BIOS.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.