Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

So we are running with veritas 9.1 with exchange agent, and I am having issues setting it up. I tried following the manuels, but I do not believe I have archived the backup-setup that I want. I do believe I need someone experienced with Veritas 9.1.

We are using 1 TB extern harddrives.

  • Mon-Friday:

    We have a "Daily backup" running from Monday till Friday. It runs a Differential backup. Settings: "When this job begins: Append to media, overwrite if no appendable media is availiable".

  • Saturday:

    we run "e-mail backup" which is Full/Mod Time backup. Settings: "When this job begins: Append to media, overwrite if no appendable media is availiable".

  • Sunday

    we run a "full backup" which makes a Full backup of everything except e-mail.

  • Daily takes less than an hour to complete.

  • Full backup - e-mail takes about 5 hours to complete
  • E-mail backup takes about 5 hours to complete.

Device settings:

Maximum size for backup-to-disk files: 4095

Maximum number of backup sets per backup-to-disk file: 8000 (I just chose the largest)

This is not working at all, and I am aware of that, it is all wrong, and I am having issues setting it all up correctly. Also, we do e-mail and fullbackup seperately, because if e-mail fails, the whole backup fails. E-mail fails once in a while and that is very annoying - would upgrading to Veritas 12 fix this?

This is what I want: I want it to contain 4 weeks of data. Fullbackup on sundays, followed by 5-6 differential backups, than a new week etc. After 4 weeks, it gets exchanged with a different external harddisk which has been stored offsite (e.g a rotation).

One of the things it seems to be doing wrong: It seems to overwrite previous backups, even though I ask it to append. I always have max 14-15 files on the backup harddisk - something that should increase. This also happens for differential backups.

Per request, I can tell you and take screenshots of my different settings.

share|improve this question
    
Any particular reason you are not running a more current version of Symantec BackupExec? –  Roy Nov 2 '09 at 15:38
1  
We had veritas 8.x many years ago, still have the license, it was free to upgrade to 9.1 - but later upgrades costs money. If there is a good reason to upgrade, I'll make sure it gets bought –  caspert Nov 2 '09 at 15:42
2  
A great reason to upgrade past 9.1 is encryption on the backup tapes. –  GregD Nov 5 '09 at 15:10

2 Answers 2

up vote 2 down vote accepted
+100

Backup to disk of an exchange server can get VERY large. Depending on the size of your backups a single 1TB disk might not hold 4 weeks worth.

Setup 3 disks and do your exchange to one, full to another, and differential to a third. Then see how much space is used after the first week. If you don't have enough disks do one backup per drive then empty the drive and use it over after recording the space used for that type of backup.

If you use scheduled jobs change the disks like clockwork before the next scheduled backup starts. If you can, let the rotation continue until you hit a 2nd week and can see how much space is used.

You'll probably find at some point that one or more of the disks will run out of space and Backup Exec will start overwriting your backup files from a prior week.

Once you are darn sure you have enough space to hold multiple weeks worth of data you can start playing with setting Overwrite Protection policies. You have to change the media properties to protect the backup files in that set for some number of hours, day, weeks, years, or infinitely. I would suggest setting the overwrite protection to the number of days +1 that corresponds to the number of weeks of backup -1 or -2 that you think you can hold based on the space and prior backups. For example if you think the drive will hold 4 weeks of data set the overwrite protection to 22 days or even 15 days and watch it very closely because if it runs out of space the backup job will just hang waiting for you to give it another drive.

You may eventually decide that you can do all 3 sets on one disk but for less time or that it works better to have more disks per week so each disk has more time on it.

In my case my backup to disk is non removable and I use LTO-3 tapes for off site storage. It takes me one tape for the full and a partial for the Diff per week.

Maximum number of backup sets per backup-to-disk file: 8000 (I just chose the largest)

BTW this is how many days/weeks/runs of the backup you can have sharing a single backup file on the disk or tape. This number should be set lower if you expect the drive to fill up. There is nothing wrong with the default option of 100 if you aren't hurting for space but I have mine set at 2 as I want those shared files freed up sooner for the future weeks backups.

It might also be worth mentioning that if you don't want to defrag those drives you'll want to use the "allocate the maximize size when creating the backup to disk file" or that shared file that spans 8000 backups will get fragmented even more every time your backup runs and eventually the non shared backups will get fragmented by the leftovers of the one file that keeps stranding small blocks all over the disk.

http://seer.entsupport.symantec.com/docs/272517.htm makes it look like 9.1 might not have the "allocate the maximize size when creating the backup to disk file" option. If that is the case that would be another reason to lower the number of backups that can share the file. You would also need to do something to alleviate fragmentation if the backups slow down too much.

share|improve this answer
    
Where do I find "Overwrite Protection policies"? That and thanks for your guide so far. When I have tested a few things, and everything seems doable, I will accept your answer. –  caspert Nov 10 '09 at 8:40
    
There are multiple places. First you have to change the Options that control if overwrite protection is in effect then you have to change the Media set properties. seer.entsupport.symantec.com/docs/265643.htm shows screenshots of both areas. Let me know if that doesn't get you there. –  pplrppl Nov 10 '09 at 13:38
    
Thanks, This is a great guide. Accepted –  caspert Nov 11 '09 at 12:07
    
You are welcome. I hope you'll come back in a month or two and let us know how your final configuration ends up. –  pplrppl Nov 11 '09 at 17:49

I'm not sure, but I believe you are going to need a separate tape for each backup set. Most likely three tapes: Mon-Friday, Saturday, Sunday.

If you try to use the same tape for a different backup set, it can't append to that tape and will overwrite it.

Update: apparently you're not using tapes, but the same idea applies to whatever media set you're using.

share|improve this answer
    
So if I need 4 weeks of data, I would need 3 x 4 harddrives? :-s –  caspert Nov 10 '09 at 7:52
    
Yves, what you said about tapes and mediasets are correct. With random access media you can however setup multiple directories and make each directory on the disk a separate "device" in Backup Exec or even put all the backup to disk files in the same "device" but use different media sets. When backing up to disk it's a lot more flexible and unfortunately confusing than doing backup to tape. –  pplrppl Apr 29 '10 at 14:45

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.