Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

How to hide web server name and openssh version on linux when scanning server ports?

when i nmap'ed(nmap -A -T4 ip server from the outside, the one shows:

Starting Nmap 4.62 ( http://nmap.org ) at 2009-11-05 14:11 IRST
LUA INTERPRETER in nse_init.cc:763: /usr/share/nmap/scripts/robots.nse:4: module 'http' not found:
no field package.preload['http']
no file '/usr/share/nmap/nselib/http.lua'
no file './http.lua'
no file '/usr/local/share/lua/5.1/http.lua'
no file '/usr/local/share/lua/5.1/http/init.lua'
no file '/usr/local/lib/lua/5.1/http.lua'
no file '/usr/local/lib/lua/5.1/http/init.lua'
no file '/usr/lib/nmap/nselib-bin/http.so'
no file './http.so'
no file '/usr/local/lib/lua/5.1/http.so'
no file '/usr/local/lib/lua/5.1/loadall.so'
SCRIPT ENGINE: Aborting script scan.
Interesting ports on
Not shown: 1710 closed ports
22/tcp   open  ssh     **OpenSSH 3.9p1** (protocol 1.99)
53/tcp   open  domain  dnsmasq 2.47
80/tcp   open  http    **Apache httpd**
222/tcp  open  ssh     **OpenSSH 3.9p1** (protocol 1.99)
8081/tcp open  http    CherryPy httpd 2.3.0
MAC Address: 00:10:F3:0F:59:B7 (Nexcom International Co.)
Device type: firewall
Running: IPCop Linux 2.4.X
OS details: IPCop firewall 1.4.10 - 1.4.15 (Linux 2.4.31 - 2.4.34)
Network Distance: 1 hop

OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 8.032 seconds

I modify httpd.conf and change two line

ServerSignature Off 
ServerTokens Prod

and restart apache server but it still shows me apache name

Could any one help me on this!

share|improve this question
It would be better just to make sure you have the latest stable version of Apache than go through this much trouble trying to hide the service name. Even without it, good scanners can detect what the software is (particularly something well-used like Apache or IIS) just based on how it responds to requests. –  romandas Apr 9 '10 at 16:13

7 Answers 7

I don't believe you can hide the server type from NMap, as it's clever enough to detect software type from handshake negotiation, fault handling etc. As for OpenSSH, from the FAQ:

2.14 - Why does OpenSSH report its version to clients?

OpenSSH, like most SSH implementations, reports its name and version to clients when they connect, e.g.


This information is used by clients and servers to enable protocol compatibility tweaks to work around changed, buggy or missing features in the implementation they are talking to. This protocol feature checking is still required at present because the SSH protocol has not been yet published as a RFC and more incompatible changes may be made before this happens.

If you really want to patch SSH to prevent version display, here's how to do it (personally untested), and here's a description of your mentality (security through obscurity, pros and cons) and here's why I think it's no good and why Bruce Schneier thinks it's good sometimes and bad the rest of the time.

share|improve this answer
up vote 4 down vote accepted

For the OpenSSH try following:

me@lappy:~# ncat 22
SSH-2.0-OpenSSH_5.1p1 Debian-3ubuntu1

Cool no exploits or anything but lets edit it just for fun. First lets make a copy of sshd to work with.

root@mohsen-desktop:~# mkdir tmp
root@mohsen-desktop:~# cd tmp
root@mohsen-desktop:~/tmp# cp /usr/sbin/sshd .

Now let modify it.

root@mohsen-desktop:~/tmp# hexedit sshd

Ok a blue window should have popped up, now look at the bottom and notice the commands. We want to use search so press control+w make sure "Search for text string" is in white hit enter. Now type "OpenSSH" hit enter and you will be directed to the exact part you need to modify.

It will look like this, just change everything that is in red to 0 and you will end up with what i have below. If you want to type something else Press TAB and type what you want into the ascii part, just remember there is no backspace.

00053FE0 6E 64 2D 6C 69 6E 65 00 4F 70 65 6E 53 53 48 5F nd-line.OpenSSH_
00053FF0 35 2E 31 70 31 20 44 65 62 69 61 6E 2D 33 75 62 5.1p1 Debian-3ub
00054000 75 6E 74 75 31 00 25 73 2C 20 25 73 0A 00 4B 52 untu1.%s, %s..KR

It should now look like this.

00053FE0 6E 64 2D 6C 69 6E 65 00 4F 70 65 6E 53 53 48 00 nd-line.OpenSSH.
00053FF0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00054000 00 00 00 00 00 00 25 73 2C 20 25 73 0A 00 4B 52 ......%s, %s..KR

When your done hit control+x to save it, and give it a launch, remember it requires the exact path.

root@mohsen-desktop:~/tmp# /root/tmp/sshd
root@mohsen-desktop:~/tmp# ncat localhost 22

Just make sure you can connect to it and your good to go.

killall sshd
rm /usr/sbin/sshd
mv /root/tmp/sshd /usr/sbin/

For hide web server name you should compile source apache and edite conf file in it.

share|improve this answer
While it is a hack, it does answer the question –  SeanDowney Aug 9 '12 at 20:27

The sshd version string is not configurable at runtime. You can change it by recompiling OpenSSH after modifying the SSH_VERSION #define, or where it is used in sshd.c :

  snprintf(buf, sizeof buf, "SSH-%d.%d-%.100s%s", major, minor,
      SSH_VERSION, newline);
share|improve this answer

It's not a configurable option. In both cases you would need to make changes to the source code.

OpenSSH relies on the version banner in order to negotiate certain features and quirks between the server and client. You can find older patches for such changes like this which you may be able to adapt for newer releases.

For Apache there has been some discussion in the past and more recently about an Off option to ServerTokens which would remove the product name. But I believe it's been vetoed each time. Again you may wish to use or adapt some available patches but you would be out there on your own.

Frankly you would remain more secure, and indeed more reliable than deviating from the release, by just ensuring that the software gets updated when required. Hiding this information might put off some drive-by attackers. But it won't do you any good against blind scripted or more determined attacks.

share|improve this answer

For the OpenSSH try following: In the /etc/ssh/sshd_config file add string:

Banner /etc/ssh/banner

And in the /etc/ssh/banner type something strange, like "MS Telnet Service 1.2" :)

For the Apache service you could try following technique:

In the httpd.conf file write this instructions:

ServerTokens ProductOnly
ServerSignature Off

But after you will view an "Apache" string, without version. If you want more security for the Apache google for the "mod_security".

Good luck!

share|improve this answer

It doesn't seem to recognize the Apache version. However, there are many ways to tell it's Apache, e.g. by looking at server error messages.

share|improve this answer

What romandas said. The bad guys will pwn you if you have an accessible, vulnerable server, regardless of whether you attempt to disguise the software version. You'll get much better results by:

  • turning on privilege separation in sshd (UsePrivilegeSeparation — should default to yes)
  • disabling password login for ssh (PasswordAuthentication no and UsePAM no)
    • unless you require PAM, then it's more configuration — but you probably don't
  • making sure Apache is chrooted to nobody or equivalent (User and Group directives in httpd.conf)

and keeping everything up-to-date. Especially apache.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.