Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have two DD-WRT routers in different locations. One of them is running the VPN version of the firmware, and the other is running the standard version. I am on location with the VPN one, and I want to upgrade the other one to run the VPN firmware so I can wire them together. Is this possible or advisable? Of course, I don't want to lose the settings on the remote one, since then I would lose my remote access (currently through SSH) and not be able to configure it.

share|improve this question

3 Answers 3

up vote 5 down vote accepted

I can't rule out the possibility of doing it but I can make some points against it.

  • The recommended process (strongly reiterated by DD-WRT) involves a series of 'hard' resets that involve power cycling while holding down the physical reset button on the router. Tricky to do remotely :)
  • Saved settings for one version of the firmware should NEVER be used with a different version.
share|improve this answer

It's never advisable to upgrade any router remotely, unless you have separate out-of-band access to it.

I base that recommendation on a decade of running the core networks for an ISP (in a previous job)

share|improve this answer

I can say from personal experience that I have nearly bricked my router trying to upgrade DD-WRT over the web interface via remote connections. I would strongly recommend being physically connected to the router and having physical access.

The hard reset procedure that is officially recommended also comes in handy if anything goes wrong.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.