Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have been doing lots of I/O testing on a ZFS system I will eventually use to serve virtual machines. I thought I would try adding SSD's for use as cache to see how much faster I can get the read speed. I also have 24GB of RAM in the machine that acts as ARC. vol0 is 6.4TB and the cache disks are 60GB SSD's. The zvol is as follows:

pool: vol0
 state: ONLINE
 scrub: none requested
config:

        NAME                     STATE     READ WRITE CKSUM
        vol0                     ONLINE       0     0     0
          c1t8d0                 ONLINE       0     0     0
        cache
          c3t5001517958D80533d0  ONLINE       0     0     0
          c3t5001517959092566d0  ONLINE       0     0     0

The issue is I'm not seeing any difference with the SSD's installed. I've tried bonnie++ benchmarks and some simple dd commands to write a file then read the file. I have run benchmarks before and after adding the SSD's.

I've ensured the file sizes are at least double my RAM so there is no way it can all get cached locally.

Am I missing something here? When am I going to see benefits of having all that cache? Am I simply not under these circumstances? Are the benchmark programs not good for testing the effect of cache because of the the way (and what) it writes and reads?

share|improve this question
    
Assuming that you're testing your production configuration here. I have a few things to point out. With ZFS you don't really want a 1 device zpool. It's not that it won't work but you are loosing out on some of the data protection that ZFS offers. In this configuration it will only be able to detect CRC errors and not correct them. It also limits the scrubbing feature to just identifying problems rather than fixing them. ZFS mirrors and RAIDZ1/2 configurations also has advantages over hardware RAID solutions. Like reslivering only the used space and no write hole with RAIDZ1/2. –  3dinfluence Nov 19 '09 at 20:31
    
Is this for serving via NFS or iSCSI? What are the bonnie++ results like so far? –  ewwhite Nov 19 '09 at 20:34
    
I should add that you can get some protection from CRC errors by using this command. "zfs set copies=2 vol0" This will cut your usable space in half and double the amount of IO involved in writes. So this isn't always an ideal solution. But for more info check out blogs.sun.com/relling/entry/zfs_copies_and_data_protection –  3dinfluence Nov 19 '09 at 20:42
1  
Seeing one zvol on my output is a bit deceiving (although technicall true). This is really coming from a vTrak promise array, 16 1TB disks in a RAID 10 configuration (2 spares). The vtrak is attached to a Nexenta head machine which created the zvol. –  jemmille Nov 19 '09 at 21:18
1  
Ok just so we are on the same page. The VTrak is setup as a JBOD and the Nexenta filer then creates a zpool with 7 pairs of mirrors + 2 spares and then this is presented as an iSCSI target to your server? Because if the VTrak is doing the RAID10 then what I said before still holds true. –  3dinfluence Nov 19 '09 at 21:28
show 5 more comments

6 Answers 6

It seems your tests are very sequential like writing a large file with dd then reading it. ZFS L2ARC cache is designed to boost performance on random reads workloads, not for streaming like patterns. Also, to get optimal performance, you might want to wait a longer time until the cache is warm. Another point would be to make sure your working set fit into the SSDs. Having io statistics observed during the tests would help figuring out what devices are used and how they perform.

share|improve this answer
add comment

Did you consider the ARC space compared to your test? In testing the I/O benefit of SSD's used as L2ARC (pool read cache) and/or ZIL (pool synchronous write cache) you need to consider the size of your ARC in contrast to your test's working set. If ARC can be used, it will be without pulling from L2ARC. Likewise, if write caching is enabled, writes will be coalesced regardless of ZIL unless flush and explicit synchronous behavior is enabled (i.e. the initiator's write cache is disabled too, etc.)

If you want to see the value of SSD for smaller working sets, consider that 16 disk RAID10 will deliver about 1200+ IOPS (SAS/SATA?) for writes and about twice that for reads. Reducing the disk set to two (for testing) and reducing the ARC to minimum (about 1/8th main memory) will then allow you to contrast spindle vs. SSD. You'd otherwise need to get more threads banging on your pool (multiple LUNs) to see the benefit. Oh yes, and get more interfaces working too, so you're not BW bound by a single 1Gbps interface...

share|improve this answer
add comment

Back in the days I used iozone to do some benchmarking. I'm not a benchmarking guru but my command for local benchmark was this:

iozone -a -o -r 128K -n 128K -g 48G

Here the description of the command:

-a: Auto-Mode
-o: This forces all writes to the file to go completely to disk before returning to the benchmark
-r: Set Record Size. Default 128K on ZFS filesystem
-n: Minimum filesize = Record Size
-g: Maximum filesize = 2 * RAM

Maybe you give it a try and post your experience with this tool. I had good results but benchmarking is like statistics. Don't trust a benchmark you didn't fake yourself. ;-)

EDIT

One thing left: I would do a benchmark with and without the caching devices. I think there you can see the impact on the results. Would be nice to see some results. Just curious.

share|improve this answer
    
I was using iozone in the beginning but since I was receiving the same results from iozone and bonnie++ I just picked bonnie++ . I'll give this command a go thought and see what happens. –  jemmille Nov 19 '09 at 19:11
    
I've done benchmarks with and without the caching. The results are almost the same which is the whole point of my question. –  jemmille Nov 19 '09 at 21:12
    
Have you played a little bit with the record size? Maybe you see an impact on a "large amount of small files". Or you ask a consulting company to do a professional benchmark if the result is important for a company decision or something like this. Sorry the benchmark using iozone didn't work out for you but like I said: I'm not a guru on filesystem benchmarking and this kind of setup worked for me to see some impact on using ZFS in general. But with "only" 8GB RAM, no caching devices and letting ZFS take care of disk management (RAID-Z1). –  cwo Nov 20 '09 at 6:14
add comment

I'm a little confused why you would use a raid array as your backing store for the zvol.

You are then limiting the way that ZFS can manage the disks/io with a layer that probably isn't as robust as ZFS. (as 3dinfluence mentions) Is setting up your RAID directly with ZFS an option?

Is it possible that you have enough spindles to match the SSD's IOs/s? (SSDs should boost your IOs/second, not necessarily sequential bandwidth)

share|improve this answer
    
After weeks of testing various configurations, a 16 disk, RAID-10 backed 6.4 TB zVol ended up being by far the fastest option and in my particular situation speed was more important than robustness (we have 2nd 16 disk mirrored array for robustness as this is project is fully redundant on all hardware). I agree, after much learning about ZFS, that I am loosing some of the ZFS features by doing it this way but if any of you who have answered work for a company where you have to "work with what you are given" I think some of this confusion should go away ;-) –  jemmille Jan 5 '10 at 12:17
add comment

Are you running your tests with compression=on? ZFS is very efficient when working with compression, and many benchmarking tools test drive performance by writing lots of zeros.

Make sure to turn off compression while benchmarking, or use random data* while benchmarking.

*write 1gb of random data: openssl rand -out myfile $((1024*1024*1000))

share|improve this answer
add comment

Anyone attempting to benchmark the L2ARC will want to see how "warm" the L2ARC is, and to also assess what that their requests are hitting the L2ARC. There is a nice tool and article for doing just that: arcstat.pl updated for L2ARC statistics

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.