Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

How do I install Linux over the network , using ftp, http....

share|improve this question

closed as not a real question by Lucas Kauffman, voretaq7 Jul 24 '12 at 18:53

It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

4  
Did you try searching a little before posting. There are plenty of howtos and documentation on the distibutions websites for doing that. Also could you give more informations about what you want to achieve? –  Maxwell Dec 3 '09 at 9:00
add comment

5 Answers

The keyword you need to search for is pxeboot.

If you're wanting to install lots of machines over the network you should also investigate kickstart.

share|improve this answer
    
+1 pxeboot is the solution and works very well. –  pjc50 Dec 3 '09 at 10:13
add comment

I think what you're searching is TFTP. Many BIOSes allow you to boot via TFTP. All you need to do is setup a TFTP Server and provide and image of your distribution. Once you boot your PC/Notebook it should fetch the image over the network and boot from it.

Best wishes, Fabian

share|improve this answer
add comment

Look into PXEBoot as the others have mentioned, but if you're looking to do the network installs on a larger scale and a good system to maintain all those machines (updates, installs, etc.) then take a look into XCAT (http://xcat.sourceforge.net/).

HTH

share|improve this answer
add comment

Does your server support remote ISO mounting such as HP's iLO? if so then I believe that'll be the simplest method, otherwise a PXE/kickstart is the the way to go.

share|improve this answer
add comment

I'll recommend to you an alternative that I'm aware of if you want a Debian based linux.

FAI (Fully automatic installation) for "large" unattended installations. A little setup has to be done, but worth it. FAI uses PXEBoot with DHCP, TFTP, NFS on a debian/ubuntu system. You can customize the install for every machine in the network using a class concept. It also integrates with CFEngine (and possible with toher management tools like puppet. I didn't try it yet).

Best regards, Humber

share|improve this answer
add comment