Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I'm looking to expand storage with my PE 2950. It has a PERC6i card that currently runs two SAS drives in a RAID 10 configuration, used as my OS partition.

I'd like to add a couple SATA drives (1TB+ each) as a RAID configuration (most likely RAID 10). The newly added drives would function purely as data storage and I would continue to run the OS off the SAS RAID array.

Is it possible to run two different RAID configurations using that single controller card? If so, is this a pretty standard setup?

share|improve this question
    
I think you mean RAID 1? –  MDMarra Dec 6 '09 at 0:23
    
I want to update this question. I have added additional drives to my PowerEdge 2950. Everything worked flawlessly. I purchased Dell CC852 trays and PN939 interposers for two Western Digital RE3 drives. It was a breeze to set the drives up in RAID 1. –  Jim Geurts Feb 12 '10 at 0:47

3 Answers 3

up vote 2 down vote accepted

It can run multiple arrays per the manual.

What I'm pretty positive it will not do is allow you to mix SAS and SATA drives.

Update: while the information above came from that same coworker in conversations (because it'd be nice to have SAS for operating system, etc. plus SATA for big storage), the situation appears to actually be that you can mix SAS and SATA drives, but apparently Dell doesn't support that configuration and won't provide warranty support related to it. Sources:

share|improve this answer
    
You certainly can run SAS and SATA drives off of a PERC6i in a mixed configuration. You need an interposer for each SATA drive and you should not mix them in the same virtual disk, but in the proposed configuration it is fine with an interposer. –  MDMarra Dec 6 '09 at 0:35
    
Revised to reflect that drive types can be mixed but are officially unsupported, links to discussion of doing just that. –  fencepost Dec 6 '09 at 1:58

Yes, you can run multiple RAID configs off one controller, and while I wouldn't call it standard, it's not particularly rare. The biggest hit you take is that the write cache gets split up amongst the different arrays, which slows things down in write-heavy scenarios.

share|improve this answer

Yes, the controller is capable of supporting more than one array. I do believe you mean RAID 1 though, not RAID 10, as RAID 10 is a stripe of mirrors and requires at least 4 drives.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.