Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have the following server configuration;

Intel Pentium 3.0 HT processor, 3 GB RAM, Intel Entry Server Board SE7230 NH1-E, 2 x 80 GB HDD (RAID-1)

I think one HDD has crashed so I want to replace it with a new HDD. Is this possible and can I migrate bad HDD to 250/320 GB or does it requires the same HDD capacity ?

Please let me know.

Thanks in advance,

Laxmilal

share|improve this question
add comment

2 Answers 2

It's a fairly standard Intel ICH7-based SATA RAID 0/1 board so I strongly suspect it will just work if you replace the 80 with a larger disk.

That said I'm sure you'll be backing up your system before doing this work so even if it doesn't work you'll be able to create as new larger R1 array and restore from backup right.

share|improve this answer
    
Ok.. Thanks, Will update my setup on this weekend. –  LLM Dec 17 '09 at 5:01
add comment

It will work, but from what I remember you will only be able to use as much capacity as the smallest HDD on the RAID array.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.