Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I get a virtual server with RHEL5 in a VMWare infrastructure. This server has two network cards, into different VLANs. Everuting looks to work fine but in a moment, one of the NICs become inactive. If I hold a ping, the first three or four tries fail but then it wake up.

Do you have any idea?

Cheers!

share|improve this question
add comment

2 Answers

Without some more detailed info, here are two guesses on what could be occurring.

  1. This sort of sounds like a common ICMP / ARP issue. When a source device that does not have an entry in it's ARP table for the destination device, it will always drop the first ICMP request while it sends out an ARP request, resulting in the behavior you describe -- the first ping fails, and the rest arrive successfully.

    Check out this article for an example.

  2. If this RHEL5 instance is a clone of another server, make sure the identifying information has been removed after the clone. Specifically the MAC address in /etc/sysconfig/network-scripts/ifcfg-ethX which can result in a duplicate MAC address, and potentially packet loss on the network.

If you are using managed switches on the network, it's fairly easy to test for situation #2. You'll potentially see MAC address flapping between interfaces.

share|improve this answer
add comment

I know this may sound like a dumb answer, but a lot of the time the simple answer can be overlooked.

Does RHEL5 have a power management section that turns off the NIC and then Wake-on-LAN?

It's a little over me atm, I've only played with basic linux builds but I'm interested in learning more.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.