I'm looking to run 10 GbE over lengths of 5-25m for a research lab and have been shopping for the appropriate optics. I'm guessing a mix of copper direct-attach cables and OM3, OM4, LC/LC multimode ...
I'm building a small datacenter from the ground, and I'm considering 10GbE. I'm looking for some advices about this decision. I've compared Infiniband, FC, 10GbE and LACP with GigE, and in the end ...
We are looking to implement 10Gig ethernet for our ESX hosts and SANs. There are a number of solutions we have been looking at and it has really boiled down to what will give us the best bandwidth. ...
I got a 10GBit Server with proxmox 2.1 installed. There's an OpenVZ container running with Ubuntu 10.04 64bit. I can get 200-300MB/sec with wget from data-center internal servers (-O /dev/null) which ...
The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other ...
Server has two 10GBASE-CX4 ports. client has 10GBASE CX4 HBA. can theybe directly connected with a CX4 cable without the need for a switch? like SAS Infiband connectors?
I'm having a problem with a couple 10GB NICs, one in particular in Windows 7 x64 that always thinks the cable is missing. The drivers for the NIC are current, downloaded from Intel- it's settings are ...