1
vote
1answer
157 views

3ware card in RAID-5 configuration slow and causes load when writing

I have a 1Gb/s bandwidth between my computers. The source can actually read and send data at 25MB/s via SSH. My test file is 4GB, I use scp without compression for the test transfer. The rate is ...
0
votes
1answer
150 views

3Ware 9500s Raid array not visible in Windows 7 x64 disk management - latest firmware and drivers

I bought a used 3Ware 9500s-4LP raid controller from Ebay (the old 3ware 8506-4lp didn't support RAID arrays over 2TB, but it was working), installed it in my server and attached it to the SATA ...
0
votes
0answers
41 views

3ware Raid Driver for Redhat

I am trying to install RedHat 5.6 64 bit on SuperMicro Server. And I created Raid5. But when I started the OS installation . Redhat prompted me to select the Driver for Raid which i downloaded. But it ...
0
votes
1answer
238 views

Older raid controllers in raid 5 vs. Jbod and SW raid

I'm in the fortunate position to have 6 Supermicro older VOD servers with the following config: Supermicro 3U case, 3xPSU Dual Xeon 3ghz P4 class cpu (5 years old.. havnt checked the exact type) 4GB ...
1
vote
5answers
5k views

Disk failed part way through 3ware RAID 5 rebuild

I have a 3ware 9650SE RAID controller with a RAID 5 array containing 15 Seagate ST31000340NS disks. After noticing ECC errors in the Port 10 drive I replaced it with a spare and began a RAID rebuild. ...