We have a RAID6 array with 12 disks on a 3ware 9650SE-12ML controller. An engineer of our server provider issued this command by mistake: sudo dd if=/dev/zero of=/dev/sde bs=1M count=500; sync; ...
I was switching the disk drives in my server, running RAID 6 on 5 disks on a 3ware 9650SE controller, for newer disks and have run into a problem. The two first disks went fine, I took out one disk ...
This morning I came in the office to discover that two of the drives on a RAID-6, 3ware 9650SE controller were marked as degraded and it was rebuilding the array. After getting to about 4%, it got ...
I have a raid6 array with 16 hdds. Two harddrives had failed (device error), but when I went to replace them, I pulled out one wrong disk! Now the raid array is INOPERABLE. Is there any way to ...