I have a 3ware 9650SE-2LP card that was set up to mirror two 1 TB disks (let's call them Disk A and Disk B). A couple of months or so ago the array stopped working (gave me an error at boot-up saying ...
TL;DR version RAID10 array working fine Reboot server as part of maintenance Array inoperable (no access whatsoever) Controller logs say a single drive is bad Remove drive & test - no bad ...
I have a 3ware 9650SE RAID controller with a RAID 5 array containing 15 Seagate ST31000340NS disks. After noticing ECC errors in the Port 10 drive I replaced it with a spare and began a RAID rebuild. ...