3ware are SATA and SAS RAID controller cards from LSI

learn more… | top users | synonyms

1
vote
2answers
949 views

RAID controller won't rebuild RAID-1 array

I have a RAID-1 array on a desktop computer. The RAID controller is a 3ware 7006-2. Recently the controller has been reporting ECC errors from one of the drives. It was able to correct all of those ...
5
votes
1answer
1k views

3Ware RAID6 array sometimes hanging. Undetected broken disk?

We have a Debian server with 3Ware 9650SE 8-drive RAID controller, with 5 disk RAID6 array, acting as virtual machine host, all Linux. Problems keep occurring and I suspect an undetected broken disk. ...
1
vote
1answer
117 views

3ware 9500 stopped showing up in Linux

I was contacted by a client about this system that they're having trouble with. As the system boots, I can hit ALT + 3 to enter the 3ware bios and it shows the drives are available in an exportable ...
1
vote
1answer
2k views

Unable to access 3ware 3dm2 web interface, failed to start listening socket

I am unable to get to the 3ware 3dm2 web interface. When I attempt to execute 3dm2 from the command line, i get the following error "(0x0C:0x0005): Failed to start listening socket". This was working ...
1
vote
1answer
672 views

ESXI 4.1 - tw_cli to manage 3ware 9650 raid card

Is there some way in the esxi cli to enable tw_cli to manage the arrays on the 9650se raid card? The goal is to manage the drives (checking array status, building arrays, etc.) without shutting down ...
1
vote
1answer
491 views

i2c cable for 3ware 9650se and SuperChassis 846A-R1200B

What's the appropriate cable to support i2c (red LED drive indicator, failure) with this combination and what's the best way to order it? I see 3ware supports 846TQ but not 846A from http://kb.lsi.com/...
0
votes
1answer
168 views

LSI iBBU07 troubleshoot: BBU not detected?

I have bought a used LSI iBBU07 for my LSI 3ware SAS 9750-8i RAID card. And now the card cannot detect the BBU even though I have seemingly installed it correctly. I would like to know that: Is ...
0
votes
1answer
90 views

3ware 9650se raid6 replaced with larger drives

I'have been running a setup with 8 drives, each 2TB by now (raid6). I started to build up the setup with 1.5TB drives back few years ago and slowly added and replaced all drives to 2 TB. Now the last ...
0
votes
1answer
329 views

3ware raid controller does not get a proper reset signal after a reboot

I have a linux server that has a 3ware controller 9650SE-4LPML connected. Today, I migrated this server with all its disks and raid controller to a new motherboard + cpu + ram (gpu is also changed). ...
0
votes
1answer
145 views

3ware controller hotswap Linux

I have a server with a 3ware 9650SE controller running Debian. The tw_cli utility shows this: Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU ---------------------------------...
0
votes
1answer
88 views

Will 3ware controllers continue to rebuild when I reboot the computer?

I am using a 3ware 9690SA-8I controller and one drive in my raid 6 hick uped and now the raid is rebuilding. Meanwhile I noticed I have an unfortunate combination of stupid programs and I need to ...
0
votes
1answer
858 views

Change the Hard Drive in RAID using tw_cli while lustre file system is mounted

I've setup RAID-5 array disk, but recently one of the Hard drives is reallocating excessive sectors: (Reallocated Sectors = 323) # tw_cli /c0/p1 show all /c0/p1 Status = OK /c0/p1 Model = ...
0
votes
1answer
612 views

3ware Raid Migration 9650SE

I'm trying to migrate a single disk on a 9650SE 4LPML to a RAID 1. I'm trying to use 3dm2 to accomplish this, but the only options it will allow me to migrate to is either RAID 0 or RAID 10. I only ...
0
votes
1answer
259 views

Older raid controllers in raid 5 vs. Jbod and SW raid

I'm in the fortunate position to have 6 Supermicro older VOD servers with the following config: Supermicro 3U case, 3xPSU Dual Xeon 3ghz P4 class cpu (5 years old.. havnt checked the exact type) 4GB ...
1
vote
0answers
36 views

Enable external SAS on 3ware 9750-16i4e Card

I am adding an external SAS enclosure to a 3ware 9750-16i4e Card. Have connected 3ware 9750-16i4e Card to 2nd 3ware 9750-16i4e Card in exteranal SAS enclosure via a Norco 1M SFF8088 to SFF8088 Cable. ...
1
vote
0answers
106 views

3ware 9500S-4LP raid-1 rebuild failed

After replacment of 2 failed drives on 3ware card i got this: Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU ----------------------------------------------------------------...
1
vote
0answers
154 views

three disks with ECC errors on 3ware raid in two weeks

I have a server I maintain for a client, It's an Intel Nehalem based computer, so not new, but in working order. It has a 3ware 9650SE-24M8 card with 20 drives attached and 4 empty slots, configured ...
1
vote
0answers
296 views

Can I use tw_cli migrate to grow a RAID10 unit where the drives for that unit were each replaced one by one with larger drives?

Can I use tw_cli migrate to grow a RAID10 unit where the drives for that unit were each replaced one by one with larger drives? (And the array was rebuilt after each replacement operation.) I am ...
1
vote
0answers
528 views

3ware 8506, Solaris (Nexenta Core) and the tw driver: driver (tw) successfully added to system but failed to attach

I've got a little Nexenta Core box at home that's doing NAS duties. Recently, I bought a second hand 3ware 8506 12-port SATA controller to go with the Supermicro AOC-SAT2-MV8 controller that I already ...
1
vote
0answers
830 views

Slow disk transfer rate

I have problem with slow disk transfer rate. It's static files server for our website. I was making backup of data and noticed that tar is very slow. So I did hdparm -t and... hdparm -t /dev/sda3 /...
0
votes
0answers
30 views

3Ware tw_cli utility shows missing port

I'm using the 3ware tw_cli utility to manage a RAID 6 array. Generally, when a drive goes bad, the tw_cli utility will show me the port with the DEGRADED drive. I can then easily identify it ...
0
votes
0answers
21 views

NOT-SUPPORTED status in RAID-6

I am relatively versatile in Linux, but I am new to RAID. I have been administrating our research group cluster for a while and recently, we've been having trouble with it. I found out that it had to ...
0
votes
0answers
26 views

Linux softraid showing failed drive, but smartctl shows no errors

I have a RAID6 array that is offline (shows 3 bad drives): cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] md2 : active raid6 sdh1[11] sdg1[10] sda1[0](F) sdm1[9] sdl1[8](F) sdf1[7]...
0
votes
0answers
159 views

Got kernel panic with 3w-sas driver after kernel update

I use CentOS 6.7 and I've got kernel panic related to LSI 3ware 9750-4i Controller after kernel update from 2.6.32-431.17.1.el6.x86_64 to 2.6.32-573.12.1.el6.x86_64. It is minor update, so I think it ...
0
votes
0answers
28 views

Hot expand RAID5 unit on 3ware 9650se

Can I migrate a 5 disk RAID5 unit where the drives for that unit were each replaced one at a time with larger ones (2TB to 3TB)? I imagine the command would look something like this in my case. ...
0
votes
0answers
46 views

3ware StorSave (write cache) settings

I'm rebuilding an old file-server which uses RAID-5 from a 3ware 9550sx and I need you guys to help get my head straight. 3ware's driver provides three write-cache options:    1) FUA &...
0
votes
0answers
126 views

The RAID array shows up as DEGRADED, but all drives are OK

The current RAID controller I am using is an AMCC 3ware 9690SA-8I SAS RAID Controller. I have just received this server unit used, and going into this blind; I have no idea how long it has been this ...
0
votes
0answers
208 views

RAID-6: Two drives failure with 3ware 9650SE

We have a 6-drive RAID-6 on one of our servers. Each drive is a 750GB Seagate, and they are connected with Hardware RAID card 3ware 9650SE. We do not have sparse drives. The system is old and probably ...
0
votes
0answers
394 views

Increasing the size of a 3ware 9650SE RAID5

These questions seemed similar, but they did not worK: Why is the 9650SE RAID1 not showing the full size of the disks? How can I increase the size of a RAID 1 array from 750GB to 1TB? 3ware Here ...