-1
votes
1answer
26 views

Unable to connect to localhost or local ip but can connect to other servers or websites

I have a server with nginx|bind|mysql installed, everything is working fine but I am unable to connect to localhost or any websites hosted on server. I tried pinging and wget and none of them work ...
-1
votes
0answers
53 views

nslookup is ok, but ping: unknown host

I'm using bind to create my own dns server, and I set the /etc/resolv.conf to my own dns server ip. $ nslookup serverfault.com Server: 10.165.12.6 Address: 10.165.12.6#53 Non-authoritative ...
0
votes
1answer
97 views

BIND 9.8.2 not giving A record for “dig domain.xxx ANY”

I got problem with my BIND 9.8.2 setup. After configuring master zone which works fine I've noticed that I cannot get a list of all A records using the dig utility with the ANY option. Here are some ...
1
vote
1answer
54 views

BIND DNS zone coalfired.net/IN: coalfired.net.coalfired.net/NS 'ns2.thirteen.pm.coalfired.net' has no address records (A or AAAA)

Since I updated my BIND DNS server I seem to be having problems with it. For some reason, when I try to start the server I get errors such as this appear: zone coalfired.net/IN: ...
0
votes
0answers
227 views

CentOS DHCP server not updating DNS nameserver on Ubuntu Client

I have a working DHCP server on CentOS, with /etc/dhcp/dhcpd.conf set up as follows: subnet 192.168.1.0 netmask 255.255.255.0 { option routers 192.168.1.1; option subnet-mask 255.255.255.0; ...
2
votes
1answer
127 views

the dnssec-keygen works very slow on Centos if we run it with inputting domain name only

From this ISC BIND article example: https://kb.isc.org/article/AA-00626/0/Inline-Signing-in-ISC-BIND-9.9.0-Examples.html $ dnssec-keygen example.com Generating key ...
2
votes
1answer
373 views

Impossible to start named on Centos

I installed bind on Centos 6.5 with yum install bind-chroot bind-utils. It's not the first time I do this and generally this works fine. But now I try this on some server and it doesn't work at all. ...
0
votes
2answers
163 views

Setting Bind9 DNS Server on CentOS 5.9

I have an OpenVZ VPS server with CentOS 5.9 32 bit installed. I also buy domain sehattotal.com from local provider (masterwebnet.com). currently sehattotal.com is hosting in hostgator.com. My ...
1
vote
1answer
85 views

DNS record change not taking effect

I have a Centos5 server on internet, say srv1.example.com with IP address say 1.1.1.1. I have changed the A records example.com, www.example.com and ny.example.com to say 2.2.2.2. I have not ...
0
votes
2answers
170 views

My Centos 6.4 doesn't accept dns requests

I've a problem with my dns server on my new installed centos 6.4 system. I went though tutorials, try configurations of iptables but can't find a solution. I've installed bind, created a config file ...
2
votes
2answers
85 views

unable to setup nameserver in CentOS 5.8

I have a VPS, which I'm trying to run a website on it and I want it to act as its own nameserver too. But so far, the domain doesn't resolve. Here's what I've done so far: first of all, in my domain ...
2
votes
1answer
1k views

Why is my DNS server not forwarding?

I have setup bind like this: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). ...
0
votes
2answers
75 views

Bind server working with www but not with non-www

I have just setup my VPS with centos and using bind server to add domains to it. My only problem is that when I access the domain with www. it doesnt work. After I investigated my problem on the ...
3
votes
1answer
133 views

Best way to implement secondary DNS server with BIND

I have one DNS server that installed on centOS and based on BIND DNS server. What i want to do is to make a secondary DNS server that will replicate with the master server and will hold all my zones ...
-1
votes
1answer
74 views

Can a named (bind) crash make a server unreachable?

My server recently became unreachable, and after restart a named error was the last line I found in /var/log/messages before restart: Jun 26 00:15:06 host named[1303]: error (network unreachable) ...
0
votes
0answers
238 views

Bind querys public nameserver gets private IP as answer

Currently I have a dnsmasq server (192.168.0.53) answering with local IP addresses for queries to a public domain. Facing internet there is an old (really old) bind server, master for example.com. So ...
0
votes
1answer
62 views

Questions about DNS, BIND and setup

I have a few questions which I can't find the answer. Is it possible to create two nameservers (ns1,ns2) with one IP ? To move my server DNS from godaddy to ns1/ns2.my_domain.com, I can use Bind ? ...
0
votes
1answer
223 views

DNS (BIND) on VPS

I just got a new VPS and everything is working fine except one little detail: DNS. Frankly I have very limited (non-existent) experience with BIND (or DNS in general) and after quite a long time I'm ...
4
votes
2answers
4k views

How to solve call trace produced by security_ops_task_setrlimit() with bind

I have a machine with CentOS 5.9 and VMware installed. Currently I am using BIND 9.3.6-P1-RedHat-9.3.6-20.P1.el5_8.6 (default shipped with distribution). When I restart the machine, I can see this ...
0
votes
1answer
260 views

Centos Bind remote query issue

I have trouble with remote access to dns server Ip address of server is 199.175.53.128 I run this command from server host cloudauth.me. 199.175.53.128 this command returns Using domain ...
0
votes
1answer
391 views

Centos binding server configuration with glue record

I have trouble with dns server at Centos I have domain cloudauth.me , I have bought it from godaddy.com . I added glue record to this domain . I configured nameservers like that. ns1.cloudauth.me ...
2
votes
4answers
17k views

Centos 6.3 Bind hangs on “Generating /etc/rndc.key”

I'm installing bind on a clean Centos 6.3 system. In previous versions that would work like a charm, but now I get Generating /etc/rndc.key when trying to start bind after the installation. ...
1
vote
2answers
364 views

Dynamically update BIND 9 Forwarders

There are two WAN interfaces to different ISP, which are configured with PEERDNS=yes and installed BIND 9 server which is configured with forward only. These interfaces are used in rotation (not ...
0
votes
2answers
3k views

DNS and name server in centos 6.3 64 bit is not pinged out side

I got a problem with centOS 6.3 64-bit. I want to setup my nameserver with bind here. I am listing all my configuration [root@izyon92 ~]# cat/etc/hosts -------------- 127.0.0.1 localhost ...
0
votes
1answer
74 views

DNS Issue- Nameserver Issue

I setup new server on centos 5.3 and configure dns and hostnam using WHM. I also register my new nameservers with my domain registrar with ns1.example.com and ns2.example.com. But i am unable to ...
1
vote
2answers
3k views

Router as primary DNS server, Server as alternate? (or vice versa)

We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS ...
-6
votes
2answers
131 views

restrict ip traffic to a user

PC1 is running on centOS with iptables, and has 5 ips (192.168.10.11-192.168.10.15) assigned, and 10 users (User1 - User9). All i want is to restrict UDP and TCP traffic of a single ip (192.168.10.11) ...
-2
votes
2answers
337 views

A records not found; non-www isn't working

I recently setup bind on CentOS and want to redirect the non-www to www part of the site. Currently the www works, but when I try the bare domain from Safari I get: Can't open http://mydomain.com ...
3
votes
1answer
229 views

Bind DNS doesn't start, error as file not found; after a /usr/sbin command it works

I get a strange error whenever I restart the server. Bind doesn't autostart or start. I get the following error when I do service named start: _default/0.168.192.in-addr.arpa/IN: file not found ...
2
votes
2answers
332 views

named gets killed

Every once in a while, my server will kill named. This gets logged: Apr 16 17:00:08 li127-203 kernel: Out of memory: Kill process 15723 (named) score 38 or sacrifice child Apr 16 17:00:08 li127-203 ...
0
votes
2answers
797 views

Setting up DNS for e-mail serving

I have a CentOS6 Server and wanted to install Zimbra 7. I was getting an /etc/hosts error and found out that I need to run a local DNS Server due to split-dns issues. I installed Bind and am trying ...
0
votes
2answers
742 views

Bind accepts only local connections

I am trying to fix the Bind (named) on CentOS server which only accepts connections from localhost. My server has local IP 192.168.2.2 and dig works if I run it on same sever where named is ...
1
vote
0answers
412 views

No names resolve in new BIND installation - wondering if issue is that BIND cannot resolve the NS

When I configure a new domain using Webmin/BIND, I am asked for a Master Server. Webmin fills this value automatically with the hostname of my box. However, this hostname is made up and there is no ...
-2
votes
2answers
142 views

BIND DNS SERVER in my Production environment [closed]

I would like to start working with a local DNS server in my production. right now instead of working with DNS I'm working with IP Addresses. I would like to know what is the effect of working with ...
0
votes
1answer
75 views

Bind mount points populating very quickly

I've got more and more bind mount points: http://pastebin.com/susp4ryL ls -l /dev/root lrwxrwxrwx 1 root root 8 mar 7 19:24 /dev/root -> /dev/md1 How to fix this ? It really slows down yum. ...
3
votes
2answers
2k views

named stopped logging to rsyslog after logs rotate

CentOS 6.2, bind 9.7.3, rsyslog 4.6.2 I recently set up a server, and I noticed that named had stopped logging to /var/log/messages after the logs had rotated. I thought that was odd, since all ...
0
votes
1answer
5k views

Bind not forwarding on CentOS 6

I have bind configured (sort of) on CentOS 6 as a forward-only DNS server, like so: options { listen-on port 53 { 127.0.0.1; }; directory "/var/named"; recursion yes; allow-recursion ...
0
votes
2answers
1k views

Check BIND version in CentOS

According to the manpage, the option -v will report the version number. But when I use /etc/init.d/named -v it outputs the following: Usage: /etc/init.d/named ...
0
votes
1answer
673 views

How to add second domain to named.conf?

I have two domains registered with a registrar and a VPS with a hosting provider (separate). I was able to get one of the domains accessible by adding the following to /etc/named.conf : zone ...
0
votes
2answers
125 views

Change mistyped domain name

I've inherited the job of maintaining a linux web server (dedicated box) that runs CentOS 5.7 & Apache/2.0.63. the site's domain name was mistyped on setup and now that's strewn across the whole ...
0
votes
1answer
915 views

Command Line - programmatically add/remove/rename BIND alias records?

For our local dev server, we routinely add and remove name alias records in our BIND/named server for our local network domain. I usually do this manually through Webmin, just out of convenience. But ...
0
votes
2answers
529 views

Trying to host my own domain, using BIND and CentOS 6. Please check my named.conf and zone for errors

delegated the namesever/ip records around 24 hours on the registars website but things aren't working. NAT: forwarding all UDP/TCP requests to internal server IP on port 53 (ISP not blocking) and ...
0
votes
1answer
546 views

Need help on configuring BIND, BIND-CHROOT on Centos 6

New to linux and just wonna test out hosting my own domain and respective zone file. Have already delegated nameservers/IP for that domain and created the DNS records. Installed BIND with Chroot and ...
0
votes
1answer
577 views

Trouble with resolving hostnames on CentOS using Bind

I'm taking a course on server administration at school and I have managed to set up virtual hosting in apache and a dns server on a virtual machine. However, I have now set up an old pc to run CentOS ...
0
votes
1answer
300 views

CentOS VPS Not showing the website in Apache

I'm having the following situation: My domain have the DNS settings working properly and it is "pingable" from outside the network, the problem is when I try to open it using a browser, nothing shows ...
2
votes
1answer
781 views

cofigure bind for google apps mx record

I have 4 emails for my domain created using google apps I can send emails from them but cannot receive, I have a centos vps, no cpanel, no mail server. How to configure bind so I can receive mails?
8
votes
3answers
6k views

Bind zone transfer refused

UPDATE: BIND Version: [root@10.224.45.130] $ named -v BIND 9.3.6-P1-RedHat-9.3.6-16.P1.el5 Operating System: CentOS release 5.6 (Final) After running [root@10.224.45.131] $ dig @10.224.45.130 ...
4
votes
2answers
3k views

CentOS BIND DNS Troubleshooting?

I'm trying to setup my first BIND9 DNS server for a small local network and can't seem to get it working. I want to create a 'local' domain of max.app As far as I can tell named is running, but it ...
0
votes
1answer
374 views

Windows machine can't resolve DNS names from CentOS named server

Just setup a new Bind/Named DNS server on our CentOS server. I'm using Webmin to do most of the administration. Once I've added some addresses to the zone, the addresses resolve just fine on the ...
0
votes
3answers
66 views

Opening apache server to the web

Very basic question inbound. I'm a CS student and i'm new to server side stuff. I managed to get myself a server in the cloud with a root ssh login and installed LAMP (centOS 5.5) and tomcat5 for ...