I'm running RHEL 6.4, kernel-2.6.32-358.el6.i686, on an HP ML 350 G5 with two onboard Broadcom NetXtreme II BCM5708 1000Base-T NICs. My goal is to channel bond the two interfaces into a mode=1 ...
Initial Setup As a Linux administrator you have installed a fresh Linux box with 6 NICs eth0 to eth5. The eth0 interface is correctly configured and all other interfaces are currently up but without ...
I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most ...
I have a server running RHEL6 with two NICs, each connect to separate switch. Two Cisco 3560 switches connected with a trunk link. The problem is the bonding link is not stable (lost some packets). ...
System: HP Proliant DL360 G5 running CentOS 5.4 Bonded interface is working fine for a long time. I just went to add an alias the way I always have on a regular interface, and on first check it works ...
I'm using dell 2950 server with RHEL 5.3 with XEN kernel default i need to do bonding of my 2 giga nic which i'm using one of the script for that as follow: ifcfg-bond0 DEVICE=bond0 BOOTPROTO=none ...