Booting is the initial set of operations that a computer system performs when electrical power is switched on. The process begins when a computer that has been turned off is re-energized, and ends when the computer is ready to perform its normal operations.

learn more… | top users | synonyms

4
votes
1answer
197 views

tape changers on Centos 6 enter flurry of activity upon boot, at udev start

I have two tape-changer robots (Quantum Superloader 3), one with parallel SCSI connectivity, the other with SAS. They were connected to a Centos 5 server, and boot would proceed normally. They are ...
3
votes
1answer
629 views

Can we set ulimit in /etc/sysconfig/init file to apply the value at boot time

I need to have the ulimit value set at the boot time to all my services. I have values set in /etc/sysconfig/limits.conf but these values are not applicable during the boot time and it takes 1024 as ...
3
votes
1answer
390 views

persisting esxi /bootbank/boot.cfg across reboots

i have a serial console connected to my esxi 5.5 server. and the configs work fine for the pxe install. however, upon reboot my console no longer works: i believe i need to change the file ...
3
votes
1answer
708 views

How to remove the pause during JBoss 5.1.0 GA boot between ProfileServiceBootstrap and AnnotationCreator?

I've managed to strip down my JBoss profile enough that it boots in 1.5 minutes. I started with the web profile and started pulling out stuff I didn't need. The bulk of my boot time can be seen here: ...
2
votes
0answers
88 views

DNS Boot Method throuth dnscmd

Through the command line on Windows Server 2008 R2, dnscmd SERVER /Config BootMethod … the source from which the DNS server gets its configuration information (is determined) [→ ...
2
votes
0answers
4k views

Bootrec /FIXBOOT vs Bootrec /FIXMBR

According to Microsoft here is what Bootrec /FIXBOOT does: "This option writes a new boot sector to the system partition by using a boot sector that's compatible with Windows Vista or Windows 7" ...
2
votes
0answers
867 views

Server 2012 (R2) - mirroring the boot drive… what is the state?

I struggle to find modern documentation here. So far we have been booting our servers from the main RAID controllers. Worked nice, but not we get the first of a new generation that hs in the back 2 ...
1
vote
0answers
58 views

Ubuntu on EC2 boot error after dist upgrade to 14.04: disk drive for / is not ready yet or not present

I just upgraded my Ubuntu 11.10 EC2 instance to 12.04, then to 12.10 and finally to 14.04 using the do-release-upgrade command each time. I arrived at 14.04 and the instance will not boot now, it ...
1
vote
0answers
48 views

Copy EFI partition to new disk in Windows Server 2008 RAID?

I have the following RAID setup ( yes, disk 1 is failing :) ). I need to copy the EFI partition from Disk 1 to the unallocated space in Disk 0, in order to make it bootable. Does Windows provide a ...
1
vote
0answers
100 views

Blank MDT 2013 boot screen on USB Deployment

I am attempting to do refreshes on some machines and on the bootup of a USB drive with a LiteTouch Image I get to the Microsoft Solutions Accelerators screen but I do not get a window for actions. I ...
1
vote
0answers
97 views

How does virt-install create and persist and secure the boot disk?

Normally when i run virt install, I boot initially from the network, by installing from source, and also including a "--disk" option. The way i do it is described here ( in the "root" of this ...
1
vote
0answers
48 views

Debian Wheezy Losing video link on boot

I bought a small Intel Atom machine (Intel atom D525) and I've tried to install Debian Wheezy on it ...needless to say , with no luck: after I install (successfully) the OS (via USB) the machine boots ...
1
vote
0answers
199 views

How can I automatically save the Dell iDRAC boot capture videos?

The Dell iDRAC automatically records video of the last three boot sequences on the server. These videos can be played back via the iDRAC web interface. The web interface also offers a "save" button to ...
1
vote
0answers
170 views

Windows Server 2008 R2 server not booting

It's a Hyper-V machine that runs the DC for my lab environment. Had a power failure that shut down my server and all other machines come up fine except this lone DC. It boots up straight to Recovery. ...
1
vote
0answers
210 views

Gearmand autostart at system boot

Gearman server is installed and working fine on Ubuntu 12.04. But it won`t start at system boot. I try this: Startup applications (/etc/init.d/gearman-job-server owned by root), sudo update-rc.d ...
1
vote
0answers
34 views

How to extend /boot which is not on lvm

I have a machine with 100 mb boot partition but for installing new kernel with other module it needs additional 50 MB. How can i extend it its not on LVM. If i attach new disk and copy whole content ...
1
vote
0answers
231 views

Dell PowerEdge R510 SATA drives appearing as SAS

I have a Dell PowerEdge R510 with the following: PERC H700 2 x 500GB cabled SATA drives (RAID 1) 6 x 3 TB SAS hot swap drives (5 in RAID 6) I was testing an online expansion of the RAID array ...
1
vote
0answers
189 views

Upgraded to Debian 6.0.7 and server now does not boot

Today, I upgraded my Debian Squeeze installation of my vps to 6.0.7. It included a kernel upgrade, but I left the kernel upgrade last, after upgrading all the other packages first. However, now the ...
1
vote
0answers
85 views

Fresh debian squeeze software raid install wont boot

I am following these instructions: http://www.iprobot.net/linux-tutorial/how-to-setup-software-raid-in-debian-ubuntu/ (I used debian-live-6.0.6-amd64-gnome-desktop.iso and DD'd that onto a usb key, ...
1
vote
0answers
38 views

Fedora 5 booting Issue

I have an issue in my fedora core 5, installed in HP Proliant ML 150 server. Till yesterday it was working fine but today when I started this it gave me the following error: File system is ext2fs, ...
1
vote
0answers
101 views

Device imaging process Won't work first time

I'm having an issue regarding a disk imaging process. To get the machine into it's initial state, I first run a simple DISKPART CLEAN, and then restart the machine. . Diskpart sel disk 0 ...
1
vote
0answers
193 views

can't update MYSQL startup settings in ubuntu

I updated to mysql 5.5 and noticed that the server wasn't starting anymore at boot but I had to do it manually. It is actually not set to start at any level. So I did chkconfig -s mysql 2345 but ...
0
votes
0answers
17 views

mdadm/grub2/lvm boot failure if all drives are physically connected

Weird problem here. I've got a Debian 7 server (quad core, 32GB RAM) that runs a whole bunch of VMs. The main boot drive is a RAID 1, with an LVM volume group called System, which contains a bunch of ...
0
votes
0answers
19 views

Boot from ISO on Remote Server with RAID (Ubuntu)

I have tried to boot from an iso file with GRUB but it does not work. The problem is that grmf-rescueboot and other standard systems don't work with a Software-RAID (mdadm). So how can I boot from an ...
0
votes
0answers
36 views

Execute a script while boot up in RHEL7

One of my server reboots every sunday and monday morning, whenever the server is up I need to do a service restart. Actually I call a script to execute itself (everytime manually). What I want to ...
0
votes
0answers
8 views

partclone.restore: progress report goes out of box

I am running partclone.restore using the "-N" option, which draws progress in a dialog-like box. If I run this command within the autorun of systemrescuecd (4.3.1), then part of the display text goes ...
0
votes
0answers
56 views

Booting XenServer Installer on USB

I'm trying to install XenServer on a system that has no CD-ROM drive (it only has a USB) I'm able to successfully boot the server using a bootable USB that boots up Linux (specifically, the GRML ...
0
votes
0answers
34 views

'Boot' folder was accidentally deleted from WinServer 2008 R1

Unfortunately, the 'Boot' folder in Windows Server 2008 R1 (not R2!) has been erroneously deleted. Now I'm seeng a message that Windows can't be started. Fortunately, I have a copy of the whole disk ...
0
votes
0answers
485 views

How to debug why systemd is idling and is not going on with the boot process?

I am trying to create a PV instance for AWS EC2. The template VM is based on CentOS 7, which is using systemd. The disk layout is two partitions: /boot (/dev/xvda1) and LVM2 (/dev/xvda2). The root ...
0
votes
0answers
98 views

Verify architecture of kernel file

Note: I am NOT interested in the currently running kernel, but on a kernel that I am going to boot and which is in a file in the filesystem. I am going to boot a new kernel. I have prepared grub.conf ...
0
votes
0answers
145 views

EC2 instance with partitions for /boot as ext4 and root / as lvm possible?

I've been playing about with this for a few days now. I haven't managed to find an example of someone running an EC2 instance with the root volume partitioned to have /boot on ext4 (or 3 or 2) and ...
0
votes
0answers
28 views

Windows 2008 Server is not booting from primary mirrored disk

We have a Windows Server 2008 with mirrored disks (RAID 1). Disk 0 & Disk 1. Last week, Disk 0 failed so we replaced that with new one. Completed mirroring from Disk 1 to Disk 0 using Diskpart. ...
0
votes
0answers
108 views

Change “boot VGA” device on Linux

I have two graphics cards (Radeon HD 5750 and Radeon X800 GT/SE), 5750 is in the first PCI-Ex slot, so it's used as the primary graphics card by BIOS and subsequently by grub2, Linux and X server. ...
0
votes
0answers
25 views

How do I update the boot environment after software mirroring a Server 2012 R2 OS Volume

I have a single physical server running Windows Server 2012 R2 My original config was a single 240Gb SSD for O/S and two larger spindles for Data storage. On installation, Windows placed 'System ...
0
votes
0answers
27 views

Boot to last VM status on XenServer reboot

I have a Citrix XenServer 6.2 on a non-prod enviroment, which means that could be affected by power outages from time to time. This server has a lot of VMs, some of them are power on and other not. ...
0
votes
0answers
66 views

Unable to connect to linux server

I tried to connect to my Linux server as root via ssh, and then when it asks me for a password I get this error message : login:status code retuned 0xc00000b5 NT_SATUS_IO_TIMEOUT CIFS VFS:send error ...
0
votes
0answers
46 views

Boot into operating system after clonezilla backup

I am working on an unattended clonezilla backup project. When the machine (re)boots, clonezilla is booted from USB (first boot device), the backup is being performed, and then the machine is shutdown ...
0
votes
0answers
206 views

Can't boot VM after P2V or ghost - Linux 2.6

I got this old machine that runs on a p2 400 and a Linux Debian 3.1 with kernel 2.6.8 and since it has modified binaries due to internal undocumented changes in the code, migrating off manually isn't ...
0
votes
0answers
230 views

Force filesystem check on Ubuntu Server 12.04.4 LTS

My root filesystem has errors. I have made sure that errors will be automatically corrected: root@host1 ~ » grep FSCKFIX /etc/default/rcS FSCKFIX=yes And then forced a filesystem check during ...
0
votes
0answers
2k views

Stuck at grub prompt after a default CentOS 6 installation

I am having a very strange problem installing CentOS 6 that I've never encountered before. I've followed these same steps thousands of times before, but within the past couple weeks I've had two ...
0
votes
0answers
101 views

Cannot enable NMI Watchdog on HM65 Core i5

I'm trying to enable the NMI Watchdog on Linux on an AFL-12A-HM65 touch screen with an Intel HM65 Core i5 CPU. The user manual has an implementation for DOS (real helpful) but not for Linux. There ...
0
votes
0answers
247 views

I am seeing error during boot sequence on HP ProLiant ML350p Gen8

The error states: Caution: Memory conflict detected. You may face boot problem. What steps would you recommend I take to troubleshoot this? Details: Dual Xeon E5 v1, two LSI 9286-8e ...
0
votes
0answers
63 views

Wrong PATH in init script on boot

Since the update of the System on my Synology NAS (x86) i have some problems with my startup scripts. The Bash scripts are stored in /usr/local/etc/rc.d. The scripts were executed for sure, because i ...
0
votes
0answers
34 views

Ubuntu 13.04 instance crash: how to debug?

We're running a server on Ubuntu 13.04 which crashes quite randomly (the instance itself crashes, not the apache2 component). I've enabled # Run bootlogd at startup -> BOOTLOGD_ENABLE=Yes , but ...
0
votes
0answers
153 views

CentOS hangs on boot after watches established

CentOS can not boot and hangs after Setting up watches. I saw the following in verbose boot. But It will boot into single user mode. CentOS 6.5 X64 any ideas to fix this please? Starting crond ...
0
votes
0answers
632 views

Ubuntu server 12.04.3 start up recovery mode

Yesterday I installed a Ubuntu server 12.04.3 as VMware instance. I only installed svn, apache2 and ssh. After I finished this basic setup (installation plus configuration) I created a zip file of the ...
0
votes
0answers
38 views

pb with fsck at boot and no-existent partition (raid1 soft, 1 disk absent)

My goal is to install debian with raid1 on 2 disks. During the install of debian, it's not possible to put a boot flag on a raid partition, so /boot is not in raid1. but I try a similar thing. (/ and ...
0
votes
0answers
38 views

What is the issue with the boot setup on this raid array?

After a secure erase of /dev/sda (Samsung 840 Pro) I had to setup grub on /dev/sda2 (for some unknown reason the /boot partition is the second one). So I ran something like this: grub root(hd0,1) ...
0
votes
0answers
297 views

Ubuntu 12.04, after reboot, ping but don't have any service up ( ssh / apache )

I need a little help, I just reboot a ubuntu server 12.04 without any special modification, it doesn't start anymore, I have a ping return but connection refused on SSH and apache is not started Here ...
0
votes
0answers
663 views

Error at booting server - ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen

I installed Debian 6 on HP server with hardware RAID 5 configured. RAID Controller Info 04:03.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01) Kernel ...